From: David Gibson <david@gibson•dropbear.id.au>
To: Olof Johansson <olof@lixom•net>
Cc: linuxppc-dev@ozlabs•org, Paul Mackerras <paulus@samba•org>
Subject: Re: [PATCH 5/6] Support for the Ebony 440GP reference board in arch/powerpc
Date: Mon, 7 May 2007 14:02:24 +1000 [thread overview]
Message-ID: <20070507040224.GD21287@localhost.localdomain> (raw)
In-Reply-To: <20070507034526.GA5352@lixom.net>
On Sun, May 06, 2007 at 10:45:26PM -0500, Olof Johansson wrote:
> Hi,
>
> On Mon, May 07, 2007 at 01:22:06PM +1000, David Gibson wrote:
> > On Fri, May 04, 2007 at 09:36:45AM -0500, Olof Johansson wrote:
> > > Hi,
> > >
> > > Not much actual board support code in here, nice and clean. :-) Seems
> > > like most of this was boot wrapper enhancements.
> >
> > Mostly, yes. There will be more in-kernel support code coming
> > eventually, when we get PCI, the RTC and various other peripherals
> > going.
>
> Makes sense.
>
> > > > Index: working-2.6/arch/powerpc/kernel/head_44x.S
> > > > ===================================================================
> > > > --- working-2.6.orig/arch/powerpc/kernel/head_44x.S 2007-05-03 10:19:32.000000000 +1000
> > > > +++ working-2.6/arch/powerpc/kernel/head_44x.S 2007-05-04 13:46:51.000000000 +1000
> > > > @@ -709,16 +709,6 @@ _GLOBAL(giveup_fpu)
> > > > blr
> > > > #endif
> > > >
> > > > -/*
> > > > - * extern void abort(void)
> > > > - *
> > > > - * At present, this routine just applies a system reset.
> > > > - */
> > > > -_GLOBAL(abort)
> > > > - mfspr r13,SPRN_DBCR0
> > > > - oris r13,r13,DBCR0_RST_SYSTEM@h
> > > > - mtspr SPRN_DBCR0,r13
> > > > -
> > >
> > > Looks like this rename is really separate from the platform support. Maybe
> > > post it as such in a patch before this one?
> >
> > Hrm, I suppose I could. Is it really worth it?
>
> Personally I prefer to see new code separate from just
> renames/moves/cleanups, it makes the new code easier to spot during
> review. My first reaction when reading this patch was "why does he remove
> this?" since it wasn't added until X chunks later down in the file.
Oh, ok, I'll split it out again.
> > > > Index: working-2.6/arch/powerpc/platforms/Makefile
> > > > ===================================================================
> > > > --- working-2.6.orig/arch/powerpc/platforms/Makefile 2007-02-14 10:58:22.000000000 +1100
> > > > +++ working-2.6/arch/powerpc/platforms/Makefile 2007-05-04 13:46:51.000000000 +1000
> > > > @@ -6,7 +6,8 @@ obj-$(CONFIG_PPC_PMAC) += powermac/
> > > > endif
> > > > endif
> > > > obj-$(CONFIG_PPC_CHRP) += chrp/
> > > > -obj-$(CONFIG_4xx) += 4xx/
> > > > +#obj-$(CONFIG_4xx) += 4xx/
> > >
> > > Hmm?
> >
> > Contrary to the comment in arch/powerpc/platforms/4xx/Makefile, an
> > empty Makefile does *not* compile correctly within Kbuild. It's
> > commented out so we build again, obviously it will need to go back in
> > once there's any code that actually works in
> > arch/powerpc/platforms/4xx.
>
> I'm not sure I follow you here. This patch also adds the makefile, and
> it's not empty (if you-ve got CONFIG_4xx enabled, it will build at least
> one file in there)?
Not quite. The patch adds the platforms/44x/Makefile, it comments out
4xx so that the (empty) platforms/4xx/Makefile is not invoked.
Possibly we should rename 44x to ibm_booke everywhere to avoid this
kind of confusion.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
next prev parent reply other threads:[~2007-05-07 4:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-04 5:54 [0/6] Ebony support David Gibson
2007-05-04 5:57 ` [PATCH 1/6] Only legacy ports should allow addr/irq changes via setserial David Gibson
2007-05-04 5:57 ` [PATCH 2/6] Use resource_size_t for serial port IO addresses David Gibson
2007-05-04 5:57 ` [PATCH 5/6] Support for the Ebony 440GP reference board in arch/powerpc David Gibson
2007-05-04 14:36 ` Olof Johansson
2007-05-05 18:43 ` Milton Miller
2007-05-05 19:02 ` Olof Johansson
2007-05-05 20:37 ` Segher Boessenkool
2007-05-06 0:43 ` David Gibson
2007-05-06 1:58 ` Segher Boessenkool
2007-05-07 3:22 ` David Gibson
2007-05-07 3:45 ` Olof Johansson
2007-05-07 4:02 ` David Gibson [this message]
2007-05-07 10:41 ` Josh Boyer
2007-05-04 5:57 ` [PATCH 6/6] Early serial debug support for PPC44x David Gibson
2007-05-04 5:57 ` [PATCH 3/6] Add device tree for Ebony David Gibson
2007-05-07 0:30 ` [PATCH 4/6] Device tree aware EMAC driver David Gibson
2007-05-07 0:57 ` Olof Johansson
2007-05-07 1:40 ` David Gibson
2007-05-07 3:56 ` Olof Johansson
2007-05-07 4:10 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070507040224.GD21287@localhost.localdomain \
--to=david@gibson$(echo .)dropbear.id.au \
--cc=linuxppc-dev@ozlabs$(echo .)org \
--cc=olof@lixom$(echo .)net \
--cc=paulus@samba$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox