From: Valentine Barshak <vbarshak@ru•mvista.com>
To: linuxppc-dev@ozlabs•org
Cc: linux-usb-devel@lists•sourceforge.net
Subject: [PATCH 1/3] usb: add device-tree-aware ehci driver
Date: Mon, 17 Sep 2007 22:18:15 +0400 [thread overview]
Message-ID: <20070917181815.GA1773@ru.mvista.com> (raw)
In-Reply-To: <20070917232809.1221acd9.sfr@canb.auug.org.au>
This adds ehci-ppc-of driver. The code is based on the
ehci-ppc-soc driver by Stefan Roese <sr@denx•de>.
Signed-off-by: Stefan Roese <sr@denx•de>
Signed-off-by: Valentine Barshak <vbarshak@ru•mvista.com>
---
drivers/usb/host/Kconfig | 8 +
drivers/usb/host/ehci-hcd.c | 16 ++
drivers/usb/host/ehci-ppc-of.c | 220 +++++++++++++++++++++++++++++++++++++++++
drivers/usb/host/ehci.h | 2
4 files changed, 244 insertions(+), 2 deletions(-)
diff -ruN linux-2.6.orig/drivers/usb/host/ehci.h linux-2.6/drivers/usb/host/ehci.h
--- linux-2.6.orig/drivers/usb/host/ehci.h 2007-09-15 14:28:42.000000000 +0400
+++ linux-2.6/drivers/usb/host/ehci.h 2007-09-15 15:12:04.000000000 +0400
@@ -725,7 +725,7 @@
* definition below can die once the 4xx support is
* finally ported over.
*/
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
#define readl_be(addr) in_be32((__force unsigned *)addr)
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
#endif
diff -ruN linux-2.6.orig/drivers/usb/host/ehci-hcd.c linux-2.6/drivers/usb/host/ehci-hcd.c
--- linux-2.6.orig/drivers/usb/host/ehci-hcd.c 2007-09-15 14:28:42.000000000 +0400
+++ linux-2.6/drivers/usb/host/ehci-hcd.c 2007-09-15 15:12:04.000000000 +0400
@@ -944,11 +944,16 @@
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
#endif
-#ifdef CONFIG_440EPX
+#if defined(CONFIG_440EPX) && !defined(CONFIG_PPC_MERGE)
#include "ehci-ppc-soc.c"
#define PLATFORM_DRIVER ehci_ppc_soc_driver
#endif
+#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
+#include "ehci-ppc-of.c"
+#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER)
#error "missing bus glue for ehci-hcd"
@@ -963,6 +968,12 @@
sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
+#ifdef OF_PLATFORM_DRIVER
+ retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
+ if (retval < 0)
+ return retval;
+#endif
+
#ifdef PLATFORM_DRIVER
retval = platform_driver_register(&PLATFORM_DRIVER);
if (retval < 0)
@@ -998,6 +1009,9 @@
static void __exit ehci_hcd_cleanup(void)
{
+#ifdef OF_PLATFORM_DRIVER
+ of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+#endif
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
#endif
diff -ruN linux-2.6.orig/drivers/usb/host/ehci-ppc-of.c linux-2.6/drivers/usb/host/ehci-ppc-of.c
--- linux-2.6.orig/drivers/usb/host/ehci-ppc-of.c 1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6/drivers/usb/host/ehci-ppc-of.c 2007-09-15 16:12:56.000000000 +0400
@@ -0,0 +1,220 @@
+/*
+ * EHCI HCD (Host Controller Driver) for USB.
+ *
+ * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
+ * Tested on AMCC PPC 440EPx
+ *
+ * Valentine Barshak <vbarshak@ru•mvista.com>
+ *
+ * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx•de>
+ * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt•com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/signal.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+/* called during probe() after chip reset completes */
+static int ehci_ppc_of_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci->sbrn = 0x20;
+ return ehci_reset(ehci);
+}
+
+
+static const struct hc_driver ehci_ppc_of_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "OF EHCI",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_ppc_of_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#ifdef CONFIG_PM
+ .hub_suspend = ehci_hub_suspend,
+ .hub_resume = ehci_hub_resume,
+#endif
+};
+
+
+static int __devinit
+ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct device_node *dn = op->node;
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct resource res;
+ int irq;
+ int rv;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+ rv = of_address_to_resource(dn, 0, &res);
+ if (rv)
+ return rv;
+
+ hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+ if (!hcd)
+ return -ENOMEM;
+
+ hcd->rsrc_start = res.start;
+ hcd->rsrc_len = res.end - res.start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
+ rv = -EBUSY;
+ goto err_rmr;
+ }
+
+ irq = irq_of_parse_and_map(dn, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+ rv = -EBUSY;
+ goto err_irq;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ printk(KERN_ERR __FILE__ ": ioremap failed\n");
+ rv = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ ehci = hcd_to_ehci(hcd);
+ if (of_device_is_compatible(dn, "ehci-be-desc"))
+ ehci->big_endian_desc = 1;
+ if (of_get_property(dn, "big-endian", NULL))
+ ehci->big_endian_mmio = 1;
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ if (of_device_is_compatible(dn, "ibm,ehci-440epx")) {
+ /*
+ * 440EPx Errata USBH_3
+ * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
+ */
+ out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0));
+ ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n");
+ }
+
+ rv = usb_add_hcd(hcd, irq, 0);
+ if (rv == 0)
+ return 0;
+
+ iounmap(hcd->regs);
+err_ioremap:
+ irq_dispose_mapping(irq);
+err_irq:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+ usb_put_hcd(hcd);
+
+ return rv;
+}
+
+
+static int ehci_hcd_ppc_of_remove(struct of_device *op)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ dev_set_drvdata(&op->dev, NULL);
+
+ dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+ usb_remove_hcd(hcd);
+
+ iounmap(hcd->regs);
+ irq_dispose_mapping(hcd->irq);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+
+static int ehci_hcd_ppc_of_shutdown(struct of_device *op)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+
+ return 0;
+}
+
+
+static struct of_device_id ehci_hcd_ppc_of_match[] = {
+ {
+ .type = "usb",
+ .compatible = "ehci",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
+
+
+static struct of_platform_driver ehci_hcd_ppc_of_driver = {
+ .name = "ppc-of-ehci",
+ .match_table = ehci_hcd_ppc_of_match,
+ .probe = ehci_hcd_ppc_of_probe,
+ .remove = ehci_hcd_ppc_of_remove,
+ .shutdown = ehci_hcd_ppc_of_shutdown,
+#ifdef CONFIG_PM
+ /*.suspend = ehci_hcd_ppc_of_drv_suspend,*/
+ /*.resume = ehci_hcd_ppc_of_drv_resume,*/
+#endif
+ .driver = {
+ .name = "ppc-of-ehci",
+ .owner = THIS_MODULE,
+ },
+};
+
diff -ruN linux-2.6.orig/drivers/usb/host/Kconfig linux-2.6/drivers/usb/host/Kconfig
--- linux-2.6.orig/drivers/usb/host/Kconfig 2007-09-15 14:28:42.000000000 +0400
+++ linux-2.6/drivers/usb/host/Kconfig 2007-09-15 15:12:04.000000000 +0400
@@ -84,6 +84,14 @@
---help---
Variation of ARC USB block used in some Freescale chips.
+config USB_EHCI_HCD_PPC_OF
+ bool "EHCI support for PPC USB controller on OF platform bus"
+ depends on USB_EHCI_HCD && PPC_OF
+ default y
+ ---help---
+ Enables support for the USB controller PowerPC present on the
+ OpenFirmware platform bus.
+
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
next prev parent reply other threads:[~2007-09-17 18:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-17 12:50 [PATCH 0/3] usb: ehci ppc device-tree-aware driver Valentine Barshak
2007-09-17 12:55 ` [PATCH 1/3] usb: add device-tree-aware ehci driver Valentine Barshak
2007-09-17 13:00 ` [PATCH 2/3] usb: ehci-ppc-of dts bindings Valentine Barshak
2007-09-19 0:25 ` Segher Boessenkool
2007-09-19 13:52 ` Valentine Barshak
2007-09-19 16:50 ` Segher Boessenkool
2007-09-19 16:55 ` Valentine Barshak
2007-09-24 19:32 ` [linux-usb-devel] " Valentine Barshak
2007-09-20 0:52 ` David Gibson
2007-09-24 21:40 ` Segher Boessenkool
2007-09-17 13:28 ` [PATCH 1/3] usb: add device-tree-aware ehci driver Stephen Rothwell
2007-09-17 14:00 ` Josh Boyer
2007-09-17 18:17 ` Valentine Barshak
2007-09-18 4:26 ` Stephen Rothwell
2007-09-18 5:39 ` David Gibson
2007-09-17 18:18 ` Valentine Barshak [this message]
2007-09-17 13:02 ` [PATCH 3/3] Add PowerPC 440EPx Sequoia ehci dts entry Valentine Barshak
2007-09-22 23:00 ` [PATCH 0/3] usb: ehci ppc device-tree-aware driver Hollis Blanchard
2007-09-24 10:33 ` Valentine Barshak
2007-10-08 18:15 ` Jerone Young
2007-10-08 18:18 ` Valentine Barshak
2007-10-08 18:22 ` Valentine Barshak
-- strict thread matches above, loose matches on Subject: below --
2007-09-24 19:25 Valentine Barshak
2007-09-24 19:26 ` [PATCH 1/3] usb: add device-tree-aware ehci driver Valentine Barshak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070917181815.GA1773@ru.mvista.com \
--to=vbarshak@ru$(echo .)mvista.com \
--cc=linux-usb-devel@lists$(echo .)sourceforge.net \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox