From: Alexandr Smirnov <asmirnov@ru•mvista.com>
To: linuxppc-dev@ozlabs•org
Subject: [PATCH 2/4] Emerson ATCA-C125 device tree
Date: Fri, 14 Mar 2008 17:28:13 +0300 [thread overview]
Message-ID: <20080314142813.GC8228@ru.mvista.com> (raw)
In-Reply-To: <20080314142220.GA8228@ru.mvista.com>
Device tree for Emerson ATCA-C125 board
Signed-off-by: Alexandr Smirnov <asmirnov@ru•mvista.com>
b/arch/powerpc/boot/dts/c125.dts | 283 +++++++++++++++++++++++++++++++++++++++
1 file changed, 283 insertions(+)
diff --git a/arch/powerpc/boot/dts/c125.dts b/arch/powerpc/boot/dts/c125.dts
new file mode 100644
index 0000000..e089f36
--- /dev/null
+++ b/arch/powerpc/boot/dts/c125.dts
@@ -0,0 +1,283 @@
+/*
+ * Device Tree Source for Emerson ATCA-C125
+ *
+ * Author: Andrei Dolnikov <adolnikov@ru•mvista.com>
+ * Alexandr Smirnov <asmirnov@ru•mvista.com>
+ *
+ * Based on mpc8548cds.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "ATCA-C125";
+ compatible = "emerson,ATCA-C125";
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0>;
+ timebase-frequency = <0>; /* From U-Boot */
+ bus-frequency = <0>; /* From U-Boot */
+ clock-frequency = <0>; /* From U-Boot */
+ d-cache-line-size = <0x20>;
+ i-cache-line-size = <0x20>;
+ d-cache-size = <0x8000>; /* L1, 32K */
+ i-cache-size = <0x8000>; /* L1, 32K */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000>; /* Filled in by bootwraper */
+ };
+
+ soc8548@ff700000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x00000000 0xff700000 0x00100000>;
+ reg = <0xff700000 0x00001000>;
+ bus-frequency = <0>; /* Fixed by bootwrapper */
+
+ memory-controller@2000 {
+ compatible = "fsl,8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0xc 0x2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <0x20>; /* 32 bytes */
+ cache-size = <0x80000>; /* L2, 512K */
+ interrupt-parent = <&MPIC>;
+ interrupts = <0xa 0x2>;
+ };
+
+ i2c@3000 {
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&MPIC>;
+ dfsrr;
+ };
+
+ mdio@24520 { /* For TSECs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ PHY0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x5 0x1>;
+ reg = <0x1>;
+ };
+
+ PHY1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x5 0x1>;
+ reg = <0x4>;
+ };
+
+ PHY2: ethernet-phy@2 {
+ device_type = "ethernet-phy";
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x5 0x1>;
+ reg = <0x5>;
+ };
+
+ PHY3: ethernet-phy@3 {
+ device_type = "ethernet-phy";
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x5 0x1>;
+ reg = <0x6>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY0>;
+ };
+
+ enet1: ethernet@25000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY1>;
+ };
+
+ enet2: ethernet@26000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY2>;
+ };
+
+ enet3: ethernet@27000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x25 0x2 0x26 0x2 0x27 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY3>;
+ };
+
+ serial0: serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>; /* Filled in by bootwraper */
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&MPIC>;
+ };
+
+ serial1: serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>; /* Filled in by bootwraper */
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&MPIC>;
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ MPIC: pic@40000 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ reg = <0x40000 0x40000>;
+ interrupt-controller;
+ big-endian;
+ };
+ };
+
+ localbus@ff705000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-localbus";
+ reg = <0xff705000 0x68>;
+
+ ranges = <0x1 0x0 0xe0000000 0x01000000
+ 0x2 0x0 0xe1000000 0x01000000
+ 0x4 0x0 0xfc400000 0x00080000>;
+
+ flash@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x1 0x0 0x01000000>;
+ bank-width = <0x2>;
+
+ partition@0 {
+ label = "Primary Kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "Primary Filesystem";
+ reg = <0x400000 0xb60000>;
+ };
+
+ partition@f60000 {
+ label = "Primary Environment";
+ reg = <0xf60000 0x20000>;
+ };
+
+ partition@f80000 {
+ label = "Primary Monitor";
+ reg = <0xf80000 0x80000>;
+ read-only;
+ };
+ };
+
+ flash@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x2 0x0 0x01000000>;
+ bank-width = <0x2>;
+
+ partition@0 {
+ label = "Secondary Kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "Secondary Filesystem";
+ reg = <0x400000 0xb60000>;
+ };
+
+ partition@f60000 {
+ label = "Secondary Environment";
+ reg = <0xf60000 0x20000>;
+ };
+
+ partition@f80000 {
+ label = "Secondary Monitor";
+ reg = <0xf80000 0x80000>;
+ read-only;
+ };
+ };
+
+ cpld@4,0 {
+ compatible = "emerson,ATCA-C125-cpld";
+ reg = <0x4 0x0 0x80000>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/soc8548/serial@4500";
+ };
+};
next prev parent reply other threads:[~2008-03-14 14:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-14 14:22 PATCH [0/4] Add support for Emerson ATCA-C125 board Alexandr Smirnov
2008-03-14 14:27 ` [PATCH 1/4] Emerson ATCA-C125 bootwrapper Alexandr Smirnov
2008-03-15 0:10 ` David Gibson
2008-03-17 12:19 ` Alexandr Smirnov
2008-03-18 1:28 ` David Gibson
2008-03-14 14:28 ` Alexandr Smirnov [this message]
2008-03-14 14:29 ` [PATCH 3/4] Emerson ATCA-C125 default config Alexandr Smirnov
2008-03-14 14:30 ` [PATCH 4/4] Emerson ATCA-C125 base support Alexandr Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080314142813.GC8228@ru.mvista.com \
--to=asmirnov@ru$(echo .)mvista.com \
--cc=linuxppc-dev@ozlabs$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox