* [PATCH] [POWERPC] booting-without-of: fix GPIO section mis-numbering
@ 2008-05-23 12:14 Anton Vorontsov
0 siblings, 0 replies; only message in thread
From: Anton Vorontsov @ 2008-05-23 12:14 UTC (permalink / raw)
To: Paul Mackerras; +Cc: David Brownell, linuxppc-dev
"Specifying GPIO information for devices" should be IX-th section,
not VIII-th.
Thanks to David Brownell for noticing.
Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
---
Documentation/powerpc/booting-without-of.txt | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..0f83d43 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -88,7 +88,7 @@ Table of Contents
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
- VIII - Specifying GPIO information for devices
+ IX - Specifying GPIO information for devices
1) gpios property
2) gpio-controller nodes
@@ -3477,8 +3477,8 @@ encodings listed below:
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
-VIII - Specifying GPIO information for devices
-==============================================
+IX - Specifying GPIO information for devices
+============================================
1) gpios property
-----------------
--
1.5.5.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2008-05-23 12:14 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-23 12:14 [PATCH] [POWERPC] booting-without-of: fix GPIO section mis-numbering Anton Vorontsov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox