* [patch 2/2] cell: add support for power button of future IBM cell blades
[not found] <20080715142529.837984547@de.ibm.com>
@ 2008-07-15 14:27 ` krafft
2008-07-15 15:18 ` [Cbe-oss-dev] " Arnd Bergmann
2008-07-15 14:27 ` [patch 1/2] cell: cleanup sysreset_hack for " krafft
1 sibling, 1 reply; 4+ messages in thread
From: krafft @ 2008-07-15 14:27 UTC (permalink / raw)
To: linuxppc-dev; +Cc: arnd, willeke, lohausen, Christian Krafft, cbe-oss-dev
From: Christian Krafft <krafft@de•ibm.com>
This patch adds support for the power button on future IBM cell blades.
It actually doesn't shut down the machine. Instead it exposes an
input device /dev/input/event0 to userspace which sends KEY_POWER
if power button has been pressed.
haldaemon actually recognizes the button, so a plattform independent acpid
replacement should handle it correctly.
Signed-off-by: Christian Krafft <krafft@de•ibm.com>
Index: linux.git/arch/powerpc/platforms/cell/Kconfig
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/Kconfig
+++ linux.git/arch/powerpc/platforms/cell/Kconfig
@@ -91,6 +91,14 @@ config PPC_IBM_CELL_RESETBUTTON
Support Pinhole Resetbutton on IBM Cell blades.
This adds a method to trigger system reset via front panel pinhole
button.
+config PPC_IBM_CELL_POWERBUTTON
+ tristate "IBM Cell Blade power button"
+ depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+ default y
+ help
+ Support Powerbutton on IBM Cell blades.
+ This will enable the powerbutton as an input device.
+
config CBE_THERM
tristate "CBE thermal support"
default m
Index: linux.git/arch/powerpc/platforms/cell/cbe_powerbutton.c
===================================================================
--- /dev/null
+++ linux.git/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -0,0 +1,117 @@
+/*
+ * driver for powerbutton on IBM cell blades
+ *
+ * (C) Copyright IBM Corp. 2005-2008
+ *
+ * Author: Christian Krafft <krafft@de•ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
+
+static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg)
+{
+ BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON);
+
+ input_report_key(button_dev, KEY_POWER, 1);
+ input_sync(button_dev);
+ input_report_key(button_dev, KEY_POWER, 0);
+ input_sync(button_dev);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+ .type = PMI_TYPE_POWER_BUTTON,
+ .handle_pmi_message = cbe_powerbutton_handle_pmi,
+};
+
+static int __init cbe_powerbutton_init(void)
+{
+ int ret = 0;
+ struct input_dev *dev;
+
+ if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+ printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ dev = input_allocate_device();
+ if (!dev) {
+ ret = -ENOMEM;
+ printk(KERN_ERR "%s: Not enough memory.\n", __func__);
+ goto out;
+ }
+
+ set_bit(EV_KEY, dev->evbit);
+ set_bit(KEY_POWER, dev->keybit);
+
+ dev->name = "Power Button";
+ dev->id.bustype = BUS_HOST;
+
+ /* this makes the button look like an acpi power button
+ * no clue whether anyone relies on that though */
+ dev->id.product = 0x02;
+ dev->phys = "LNXPWRBN/button/input0";
+
+ button_pdev = platform_device_register_simple("power_button", 0, NULL,
0);
+ if (IS_ERR(button_pdev)) {
+ ret = PTR_ERR(button_pdev);
+ goto out_free_input;
+ }
+
+ dev->dev.parent = &button_pdev->dev;
+ ret = input_register_device(dev);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed to register device\n", __func__);
+ goto out_free_pdev;
+ }
+
+ button_dev = dev;
+
+ ret = pmi_register_handler(&cbe_pmi_handler);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed to register with pmi.\n",
__func__);
+ goto out_free_pdev;
+ }
+
+ goto out;
+
+out_free_pdev:
+ platform_device_unregister(button_pdev);
+out_free_input:
+ input_free_device(dev);
+out:
+ return ret;
+}
+
+static void __exit cbe_powerbutton_exit(void)
+{
+ pmi_unregister_handler(&cbe_pmi_handler);
+ platform_device_unregister(button_pdev);
+ input_free_device(button_dev);
+}
+
+module_init(cbe_powerbutton_init);
+module_exit(cbe_powerbutton_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de•ibm.com>");
Index: linux.git/arch/powerpc/platforms/cell/Makefile
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/Makefile
+++ linux.git/arch/powerpc/platforms/cell/Makefile
@@ -9,6 +9,8 @@ obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cp
obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o
cbe-cpufreq-y += cbe_cpufreq_pervasive.o
cbe_cpufreq.o
+obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o
+
ifeq ($(CONFIG_SMP),y)
obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o
endif
Index: linux.git/include/asm-powerpc/pmi.h
===================================================================
--- linux.git.orig/include/asm-powerpc/pmi.h
+++ linux.git/include/asm-powerpc/pmi.h
@@ -30,6 +30,7 @@
#ifdef __KERNEL__
#define PMI_TYPE_FREQ_CHANGE 0x01
+#define PMI_TYPE_POWER_BUTTON 0x02
#define PMI_READ_TYPE 0
#define PMI_READ_DATA0 1
#define PMI_READ_DATA1 2
--
Mit freundlichen Gruessen,
kind regards,
Christian Krafft
Linux Kernel Development
IBM Systems & Technology Group
Phone: +49-07031-16-2032
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter
Geschaetsfuehung: Herbert Kircher
Sitz der Gesellschaft: Boelingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
^ permalink raw reply [flat|nested] 4+ messages in thread* [patch 1/2] cell: cleanup sysreset_hack for IBM cell blades
[not found] <20080715142529.837984547@de.ibm.com>
2008-07-15 14:27 ` [patch 2/2] cell: add support for power button of future IBM cell blades krafft
@ 2008-07-15 14:27 ` krafft
2008-07-15 15:17 ` [Cbe-oss-dev] " Arnd Bergmann
1 sibling, 1 reply; 4+ messages in thread
From: krafft @ 2008-07-15 14:27 UTC (permalink / raw)
To: linuxppc-dev; +Cc: arnd, willeke, lohausen, Christian Krafft, cbe-oss-dev
From: Christian Krafft <krafft@de•ibm.com>
This patch adds a config option for the sysreset_hack used for
IBM Cell blades. The code is moves from pervasive.c into ras.c and
gets it's own init method.
Signed-off-by: Christian Krafft <krafft@de•ibm.com>
Index: linux.git/arch/powerpc/platforms/cell/pervasive.c
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/pervasive.c
+++ linux.git/arch/powerpc/platforms/cell/pervasive.c
@@ -38,8 +38,6 @@
#include "pervasive.h"
-static int sysreset_hack;
-
static void cbe_power_save(void)
{
unsigned long ctrl, thread_switch_control;
@@ -87,9 +85,6 @@ static void cbe_power_save(void)
static int cbe_system_reset_exception(struct pt_regs *regs)
{
- int cpu;
- struct cbe_pmd_regs __iomem *pmd;
-
switch (regs->msr & SRR1_WAKEMASK) {
case SRR1_WAKEEE:
do_IRQ(regs);
@@ -98,19 +93,7 @@ static int cbe_system_reset_exception(st
timer_interrupt(regs);
break;
case SRR1_WAKEMT:
- /*
- * The BMC can inject user triggered system reset exceptions,
- * but cannot set the system reset reason in srr1,
- * so check an extra register here.
- */
- if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
- pmd = cbe_get_cpu_pmd_regs(cpu);
- if (in_be64(&pmd->ras_esc_0) & 0xffff) {
- out_be64(&pmd->ras_esc_0, 0);
- return 0;
- }
- }
- break;
+ return cbe_sysreset_hack();
#ifdef CONFIG_CBE_RAS
case SRR1_WAKESYSERR:
cbe_system_error_exception(regs);
@@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void)
if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
return;
- sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
-
for_each_possible_cpu(cpu) {
struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
if (!regs)
@@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void)
/* Enable Pause(0) control bit */
out_be64(®s->pmcr, in_be64(®s->pmcr) |
CBE_PMD_PAUSE_ZERO_CONTROL);
-
- /* Enable JTAG system-reset hack */
- if (sysreset_hack)
- out_be32(®s->fir_mode_reg,
- in_be32(®s->fir_mode_reg) |
- CBE_PMD_FIR_MODE_M8);
}
ppc_md.power_save = cbe_power_save;
Index: linux.git/arch/powerpc/platforms/cell/Kconfig
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/Kconfig
+++ linux.git/arch/powerpc/platforms/cell/Kconfig
@@ -83,6 +83,14 @@ config CBE_RAS
depends on PPC_CELL_NATIVE
default y
+config PPC_IBM_CELL_RESETBUTTON
+ bool "IBM Cell Blade Pinhole reset button"
+ depends on CBE_RAS && PPC_IBM_CELL_BLADE
+ default y
+ help
+ Support Pinhole Resetbutton on IBM Cell blades.
+ This adds a method to trigger system reset via front panel pinhole
button. +
config CBE_THERM
tristate "CBE thermal support"
default m
Index: linux.git/arch/powerpc/platforms/cell/pervasive.h
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/pervasive.h
+++ linux.git/arch/powerpc/platforms/cell/pervasive.h
@@ -30,4 +30,13 @@ extern void cbe_system_error_exception(s
extern void cbe_maintenance_exception(struct pt_regs *regs);
extern void cbe_thermal_exception(struct pt_regs *regs);
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+extern int cbe_sysreset_hack(void);
+#else
+static inline int cbe_sysreset_hack(void)
+{
+ return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
#endif
Index: linux.git/arch/powerpc/platforms/cell/ras.c
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/ras.c
+++ linux.git/arch/powerpc/platforms/cell/ras.c
@@ -230,6 +230,52 @@ static struct notifier_block cbe_ptcal_r
.notifier_call = cbe_ptcal_notify_reboot
};
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+static int sysreset_hack;
+
+static int __init cbe_sysreset_init(void)
+{
+ struct cbe_pmd_regs __iomem *regs;
+
+ sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+ if (!sysreset_hack)
+ return 0;
+
+ regs = cbe_get_cpu_pmd_regs(0);
+ if (!regs)
+ return 0;
+
+ /* Enable JTAG system-reset hack */
+ out_be32(®s->fir_mode_reg,
+ in_be32(®s->fir_mode_reg) |
+ CBE_PMD_FIR_MODE_M8);
+
+ return 0;
+}
+device_initcall(cbe_sysreset_init);
+
+int cbe_sysreset_hack(void)
+{
+ struct cbe_pmd_regs __iomem *regs;
+
+ /*
+ * The BMC can inject user triggered system reset exceptions,
+ * but cannot set the system reset reason in srr1,
+ * so check an extra register here.
+ */
+ if (sysreset_hack && (smp_processor_id() == 0)) {
+ regs = cbe_get_cpu_pmd_regs(0);
+ if (!regs)
+ return 0;
+ if (in_be64(®s->ras_esc_0) & 0x0000ffff) {
+ out_be64(®s->ras_esc_0, 0);
+ return 0;
+ }
+ }
+ return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
int __init cbe_ptcal_init(void)
{
int ret;
--
Mit freundlichen Gruessen,
kind regards,
Christian Krafft
Linux Kernel Development
IBM Systems & Technology Group
Phone: +49-07031-16-2032
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter
Geschaetsfuehung: Herbert Kircher
Sitz der Gesellschaft: Boelingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
^ permalink raw reply [flat|nested] 4+ messages in thread