* [PATCH 1/4] powerpc/QE: implement QE Pin Multiplexing API
2008-10-17 19:15 [PATCH 0/4] Few patches needed to support QE USB on MPC8360E-{MDS,RDK} boards Anton Vorontsov
@ 2008-10-17 19:16 ` Anton Vorontsov
2008-10-17 19:16 ` [PATCH 2/4] powerpc: add driver for simple GPIO banks Anton Vorontsov
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2008-10-17 19:16 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, Timur Tabi
With this API we're able to set a QE pin to the GPIO mode or a dedicated
peripheral function.
The API relies on the fact that QE gpio controllers are registered. If
they aren't, the API won't work (gracefully though).
There is one caveat though: if anybody occupied the node->data before us,
or overwrote it, then bad things will happen. Luckily this is all in the
platform code that we fully control, so this should never happen.
I could implement more checks (for example we could create a list of
successfully registered QE controllers, and compare the node->data in the
qe_pin_request()), but this is unneeded if nobody is going to do silly
things behind our back.
Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
---
arch/powerpc/include/asm/qe.h | 9 ++
arch/powerpc/sysdev/qe_lib/gpio.c | 195 +++++++++++++++++++++++++++++++++++++
2 files changed, 204 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index edee15d..31ddbc9 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -112,6 +112,15 @@ extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
int assignment, int has_irq);
extern int par_io_data_set(u8 port, u8 pin, u8 val);
+/*
+ * Pin multiplexing functions.
+ */
+struct qe_pin;
+extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern void qe_pin_free(struct qe_pin *qe_pin);
+extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
+extern void qe_pin_set_dedicated(struct qe_pin *pin);
+
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
enum qe_clock qe_clock_source(const char *source);
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 8e5a0bc..7f10b18 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
@@ -24,8 +25,14 @@ struct qe_gpio_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
+ unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
/* shadowed data register to clear/set bits safely */
u32 cpdata;
+
+ /* saved_regs used to restore dedicated functions */
+ struct qe_pio_regs saved_regs;
};
static inline struct qe_gpio_chip *
@@ -40,6 +47,12 @@ static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
struct qe_pio_regs __iomem *regs = mm_gc->regs;
qe_gc->cpdata = in_be32(®s->cpdata);
+ qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+ qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1);
+ qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2);
+ qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1);
+ qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2);
+ qe_gc->saved_regs.cpodr = in_be32(®s->cpodr);
}
static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
@@ -103,6 +116,188 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
return 0;
}
+struct qe_pin {
+ /*
+ * The qe_gpio_chip name is unfortunate, we should change that to
+ * something like qe_pio_controller. Someday.
+ */
+ struct qe_gpio_chip *controller;
+ int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np: device node to get a pin from
+ * @index: index of a pin in the device tree
+ * Context: non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ struct qe_pin *qe_pin;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gc = NULL;
+ struct of_mm_gpio_chip *mm_gc;
+ struct qe_gpio_chip *qe_gc;
+ int err;
+ int size;
+ const void *gpio_spec;
+ const u32 *gpio_cells;
+ unsigned long flags;
+
+ qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+ if (!qe_pin) {
+ pr_debug("%s: can't allocate memory\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
+ &gc, &gpio_spec);
+ if (err) {
+ pr_debug("%s: can't parse gpios property\n", __func__);
+ goto err0;
+ }
+
+ if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) {
+ pr_debug("%s: tried to get a non-qe pin\n", __func__);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ of_gc = gc->data;
+ if (!of_gc) {
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ err = -ENODEV;
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ err = of_gc->xlate(of_gc, np, gpio_spec);
+ if (err < 0)
+ goto err1;
+
+ mm_gc = to_of_mm_gpio_chip(&of_gc->gc);
+ qe_gc = to_qe_gpio_chip(mm_gc);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+ qe_pin->controller = qe_gc;
+ qe_pin->num = err;
+ err = 0;
+ } else {
+ err = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ if (!err)
+ return qe_pin;
+err1:
+ of_node_put(gc);
+err0:
+ kfree(qe_pin);
+ pr_debug("%s failed with status %d\n", __func__, err);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ unsigned long flags;
+ const int pin = qe_pin->num;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+ test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+ int pin = qe_pin->num;
+ u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+ u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+ bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (second_reg) {
+ clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2);
+ clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2);
+ } else {
+ clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2);
+ clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2);
+ }
+
+ if (sregs->cpdata & mask1)
+ qe_gc->cpdata |= mask1;
+ else
+ qe_gc->cpdata &= ~mask1;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+ clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ /* Let's make it input by default, GPIO API is able to change that. */
+ __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
static int __init qe_add_gpiochips(void)
{
struct device_node *np;
--
1.5.6.3
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/4] powerpc: add driver for simple GPIO banks
2008-10-17 19:15 [PATCH 0/4] Few patches needed to support QE USB on MPC8360E-{MDS,RDK} boards Anton Vorontsov
2008-10-17 19:16 ` [PATCH 1/4] powerpc/QE: implement QE Pin Multiplexing API Anton Vorontsov
@ 2008-10-17 19:16 ` Anton Vorontsov
2008-10-17 19:16 ` [PATCH 3/4] powerpc/83xx: add USB Host/Gadget support for the MPC8360E-MDS boards Anton Vorontsov
2008-10-17 19:16 ` [PATCH 4/4] powerpc/83xx: add USB Host support for the MPC8360E-RDK boards Anton Vorontsov
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2008-10-17 19:16 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, Timur Tabi
The driver supports very simple GPIO controllers, that is, when a
controller provides just a 'data' register. Such controllers may be
found in various BCSRs (Board's FPGAs used to control board's
switches, LEDs, chip-selects, Ethernet/USB PHY power, etc).
So far we support only 1-byte GPIO banks. Support for other widths may
be implemented when/if needed.
p.s.
To avoid "made up" compatible entries (like compatible = "simple-gpio"),
boards must call the simple_gpiochip_init() to pass the compatible
string.
Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
---
Documentation/powerpc/dts-bindings/fsl/board.txt | 30 ++++
arch/powerpc/platforms/Kconfig | 10 ++
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/simple_gpio.c | 156 ++++++++++++++++++++++
arch/powerpc/sysdev/simple_gpio.h | 13 ++
5 files changed, 210 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/sysdev/simple_gpio.c
create mode 100644 arch/powerpc/sysdev/simple_gpio.h
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 74ae6f1..e97877f 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -27,3 +27,33 @@ Example (MPC8610HPCD):
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>;
};
+
+* Freescale BCSR GPIO banks
+
+Some BCSR registers act as simple GPIO controllers, each such
+register can be represented by the gpio-controller node.
+
+Required properities:
+- compatible : Should be "fsl,<board>-bcsr-gpio";
+- reg : Should contain the address and the lenght of the GPIO bank
+ register;
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional paramters (currently unused);
+- gpio-controller : Marks the port as GPIO controller.
+
+Example:
+
+ bcsr@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "board-control";
+ reg = <1 0 0x8000>;
+ ranges = <0 1 0 0x8000>;
+
+ bcsr13: gpio-controller@d {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360mds-bcsr-gpio";
+ reg = <0xd 1>;
+ gpio-controller;
+ };
+ };
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47e956c..63780c8 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -312,4 +312,14 @@ config MPC8xxx_GPIO
Say Y here if you're going to use hardware that connects to the
MPC831x/834x/837x/8572/8610 GPIOs.
+config SIMPLE_GPIO
+ bool "Support for simple, memory-mapped GPIO controllers"
+ depends on PPC
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to support simple, memory-mapped GPIO controllers.
+ These are usually BCSRs used to control board's switches, LEDs,
+ chip-selects, Ethernet/USB PHY's power and various other small
+ on-board peripherals.
endmenu
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a44709a..ee2ddae 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
+obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
new file mode 100644
index 0000000..d62c85a
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -0,0 +1,156 @@
+/*
+ * Simple Memory-Mapped GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru•mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/prom.h>
+#include "simple_gpio.h"
+
+struct u8_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u8 data;
+};
+
+static struct u8_gpio_chip *to_u8_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct u8_gpio_chip, mm_gc);
+}
+
+static u8 u8_pin2mask(unsigned int pin)
+{
+ return 1 << (8 - 1 - pin);
+}
+
+static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+ return in_8(mm_gc->regs) & u8_pin2mask(gpio);
+}
+
+static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&u8_gc->lock, flags);
+
+ if (val)
+ u8_gc->data |= u8_pin2mask(gpio);
+ else
+ u8_gc->data &= ~u8_pin2mask(gpio);
+
+ out_8(mm_gc->regs, u8_gc->data);
+
+ spin_unlock_irqrestore(&u8_gc->lock, flags);
+}
+
+static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ return 0;
+}
+
+static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ u8_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc);
+
+ u8_gc->data = in_8(mm_gc->regs);
+}
+
+static int __init u8_simple_gpiochip_add(struct device_node *np)
+{
+ int ret;
+ struct u8_gpio_chip *u8_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
+ if (!u8_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&u8_gc->lock);
+
+ mm_gc = &u8_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = u8_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 8;
+ gc->direction_input = u8_gpio_dir_in;
+ gc->direction_output = u8_gpio_dir_out;
+ gc->get = u8_gpio_get;
+ gc->set = u8_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ return 0;
+err:
+ kfree(u8_gc);
+ return ret;
+}
+
+int __init simple_gpiochip_init(const char *compatible)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, compatible) {
+ int ret;
+ struct resource r;
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret)
+ goto err;
+
+ switch (resource_size(&r)) {
+ case 1:
+ ret = u8_simple_gpiochip_add(np);
+ if (ret)
+ goto err;
+ break;
+ default:
+ /*
+ * Whenever you need support for GPIO bank width > 1,
+ * please just turn u8_ code into huge macros, and
+ * construct needed uX_ code with it.
+ */
+ ret = -ENOSYS;
+ goto err;
+ }
+ continue;
+err:
+ pr_err("%s: registration failed, status %d\n",
+ np->full_name, ret);
+ }
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
new file mode 100644
index 0000000..389f712
--- /dev/null
+++ b/arch/powerpc/sysdev/simple_gpio.h
@@ -0,0 +1,13 @@
+#ifndef __SYSDEV_SIMPLE_GPIO_H
+#define __SYSDEV_SIMPLE_GPIO_H
+
+#ifdef CONFIG_SIMPLE_GPIO
+extern int __init simple_gpiochip_init(const char *compatible);
+#else
+static inline int __init simple_gpiochip_init(const char *compatible)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_SIMPLE_GPIO */
+
+#endif /* __SYSDEV_SIMPLE_GPIO_H */
--
1.5.6.3
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 3/4] powerpc/83xx: add USB Host/Gadget support for the MPC8360E-MDS boards
2008-10-17 19:15 [PATCH 0/4] Few patches needed to support QE USB on MPC8360E-{MDS,RDK} boards Anton Vorontsov
2008-10-17 19:16 ` [PATCH 1/4] powerpc/QE: implement QE Pin Multiplexing API Anton Vorontsov
2008-10-17 19:16 ` [PATCH 2/4] powerpc: add driver for simple GPIO banks Anton Vorontsov
@ 2008-10-17 19:16 ` Anton Vorontsov
2008-10-17 19:16 ` [PATCH 4/4] powerpc/83xx: add USB Host support for the MPC8360E-RDK boards Anton Vorontsov
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2008-10-17 19:16 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, Timur Tabi
- Update the device tree per QE USB bindings;
- Add timer (FSL GTM) node;
- Add gpio-controller node for BCSR13 bank (GPIOs on that bank
are used to control the USB transceiver);
- Set up other BCSR registers;
- Configure the QE Par IO.
The work is loosely based on Li Yang's patch[1], which is used
to support peripheral mode only.
[1] http://ozlabs.org/pipermail/linuxppc-dev/2008-August/061357.html
The s-o-b line of the original patch preserved here.
Signed-off-by: Li Yang <leoli@freescale•com>
Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
---
arch/powerpc/boot/dts/mpc836x_mds.dts | 43 ++++++++++++++++++++++-
arch/powerpc/platforms/83xx/mpc836x_mds.c | 52 ++++++++++++++++++++++++++++-
2 files changed, 92 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 66a12d2..bdb14ba 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -69,8 +69,18 @@
};
bcsr@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "board-control";
reg = <1 0 0x8000>;
+ ranges = <0 1 0 0x8000>;
+
+ bcsr13: gpio-controller@d {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360mds-bcsr-gpio";
+ reg = <0xd 1>;
+ gpio-controller;
+ };
};
};
@@ -195,10 +205,21 @@
};
par_io@1400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x1400 0x100>;
+ ranges = <0 0x1400 0x100>;
device_type = "par_io";
num-ports = <7>;
+ qe_pio_b: gpio-controller@18 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x18 0x18>;
+ gpio-controller;
+ };
+
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
@@ -282,6 +303,15 @@
};
};
+ timer@440 {
+ compatible = "fsl,mpc8360-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ clock-frequency = <132000000>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ };
+
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
@@ -301,11 +331,20 @@
};
usb@6c0 {
- compatible = "qe_udc";
+ compatible = "fsl,mpc8360-qe-usb",
+ "fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
- mode = "slave";
+ fsl,fullspeed-clock = "clk21";
+ fsl,lowspeed-clock = "brg9";
+ gpios = <&qe_pio_b 2 0 /* USBOE */
+ &qe_pio_b 3 0 /* USBTP */
+ &qe_pio_b 8 0 /* USBTN */
+ &qe_pio_b 9 0 /* USBRP */
+ &qe_pio_b 11 0 /* USBRN */
+ &bcsr13 5 0 /* SPEED */
+ &bcsr13 4 1>; /* POWER */
};
enet0: ucc@2000 {
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 9d46e5b..4e69f7b 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -43,6 +43,7 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
@@ -127,9 +128,58 @@ static void __init mpc836x_mds_setup_arch(void)
iounmap(immap);
}
- iounmap(bcsr_regs);
of_node_put(np);
}
+#ifdef CONFIG_QE_USB
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
+ if (np) {
+ const char *mode = of_get_property(np, "mode", NULL);
+
+ par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */
+ par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */
+ par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */
+ par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
+ par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */
+ par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */
+ par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */
+
+#define BCSR8_TSEC1M_MASK (0x3 << 6)
+#define BCSR8_TSEC1M_RGMII (0x0 << 6)
+#define BCSR8_TSEC2M_MASK (0x3 << 4)
+#define BCSR8_TSEC2M_RGMII (0x0 << 4)
+ /*
+ * Default is GMII (2), but we should set it to RGMII (0) if
+ * we use USB (Eth PHY is in RGMII mode anyway).
+ */
+ clrsetbits_8(&bcsr_regs[8],
+ BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
+ BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
+
+#define BCSR13_USBMASK 0x0f
+#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */
+#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */
+#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */
+#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */
+
+ clrsetbits_8(&bcsr_regs[13], BCSR13_USBMASK, BCSR13_USBSPEED);
+
+ if (mode && !strcmp(mode, "peripheral")) {
+ setbits8(&bcsr_regs[13], BCSR13_nUSBVCC);
+ qe_usb_clock_set(QE_CLK21, 48000000);
+ } else {
+ setbits8(&bcsr_regs[13], BCSR13_USBMODE);
+ /*
+ * The BCSR GPIOs are used to control power and
+ * speed of the USB transceiver. This is needed for
+ * the USB Host only.
+ */
+ simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
+ }
+
+ of_node_put(np);
+ }
+#endif /* CONFIG_QE_USB */
+ iounmap(bcsr_regs);
#endif /* CONFIG_QUICC_ENGINE */
}
--
1.5.6.3
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4/4] powerpc/83xx: add USB Host support for the MPC8360E-RDK boards
2008-10-17 19:15 [PATCH 0/4] Few patches needed to support QE USB on MPC8360E-{MDS,RDK} boards Anton Vorontsov
` (2 preceding siblings ...)
2008-10-17 19:16 ` [PATCH 3/4] powerpc/83xx: add USB Host/Gadget support for the MPC8360E-MDS boards Anton Vorontsov
@ 2008-10-17 19:16 ` Anton Vorontsov
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2008-10-17 19:16 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, Timur Tabi
Simply add the usb node to support USB host on the MPC8360E-RDK
boards.
Currently U-Boot doesn't fill the clock-frequency property for
timer nodes, so for now we have to fill it manually.
Signed-off-by: Anton Vorontsov <avorontsov@ru•mvista.com>
---
arch/powerpc/boot/dts/mpc836x_rdk.dts | 19 +++++++++++++++++--
1 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index decadf3..37b7895 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -218,8 +218,23 @@
reg = <0x440 0x40>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
- /* filled by u-boot */
- clock-frequency = <0>;
+ clock-frequency = <166666666>;
+ };
+
+ usb@6c0 {
+ compatible = "fsl,mpc8360-qe-usb",
+ "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ fsl,fullspeed-clock = "clk21";
+ gpios = <&qe_pio_b 2 0 /* USBOE */
+ &qe_pio_b 3 0 /* USBTP */
+ &qe_pio_b 8 0 /* USBTN */
+ &qe_pio_b 9 0 /* USBRP */
+ &qe_pio_b 11 0 /* USBRN */
+ &qe_pio_e 20 0 /* SPEED */
+ &qe_pio_e 21 1 /* POWER */>;
};
spi@4c0 {
--
1.5.6.3
^ permalink raw reply related [flat|nested] 5+ messages in thread