* Problems Compiling 2_4 for 860
@ 2001-03-16 18:04 Arturo Nunez
2001-03-19 22:01 ` Cal Erickson
0 siblings, 1 reply; 3+ messages in thread
From: Arturo Nunez @ 2001-03-16 18:04 UTC (permalink / raw)
To: ppc
Hello:
I have been compiling using the MVISTA tools the kernel 2_4 from
bitkeeper.
The CPU is = XPC860TZP50B5
I have follow the following Steps.
- make mrproper
- make rpxcllf_config
- make oldconfig
- make dep zImage
Finally I may compile the zImage, but when I try to load from the
Board, doesnt Recognize the file, the message is :
load_tftp(): ** E_RPX_NOT_SREC
What should be error ??
Regards
Arturo Nunez
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Problems Compiling 2_4 for 860
2001-03-16 18:04 Problems Compiling 2_4 for 860 Arturo Nunez
@ 2001-03-19 22:01 ` Cal Erickson
2001-03-20 1:12 ` Arturo Nunez
0 siblings, 1 reply; 3+ messages in thread
From: Cal Erickson @ 2001-03-19 22:01 UTC (permalink / raw)
To: Arturo Nunez; +Cc: ppc
Arturo,
You did not convert the output from make zImage to an s-records file.
This can be done through objcopy. Then you load the s-records file
and you should not get the error you see.
Cal Erickson
Arturo Nunez wrote:
> Hello:
> I have been compiling using the MVISTA tools the kernel 2_4 from
> bitkeeper.
> The CPU is = XPC860TZP50B5
> I have follow the following Steps.
> - make mrproper
> - make rpxcllf_config
> - make oldconfig
> - make dep zImage
>
> Finally I may compile the zImage, but when I try to load from the
> Board, doesnt Recognize the file, the message is :
>
> load_tftp(): ** E_RPX_NOT_SREC
> What should be error ??
> Regards
>
> Arturo Nunez
>
--
===========================================================================
Cal Erickson MontaVista Software Inc.
Linux Consultant 1237 E. Arques Ave.
Phone (408) 328-0304 Sunnyvale CA 94085
Fax (408) 328-9204 web http://www.mvista.com
eCode: http://cal@work.com.ecode.com
===========================================================================
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Problems Compiling 2_4 for 860
2001-03-19 22:01 ` Cal Erickson
@ 2001-03-20 1:12 ` Arturo Nunez
0 siblings, 0 replies; 3+ messages in thread
From: Arturo Nunez @ 2001-03-20 1:12 UTC (permalink / raw)
To: cal_erickson; +Cc: linuxppc-embedded
Hello:
> Arturo,
> You did not convert the output from make zImage to an s-records file.
> This can be done through objcopy. Then you load the s-records file
> and you should not get the error you see.
Thanks.
Also I have used "zsrec",as:
$zsrec arch/ppc/mbxboot/zImage > vmlinuz.srec
BUT what I cant manage is the 100mbits port.
Even its recognized through the Kernel as eth1, I cant manage it.
I have defined 2 Ip adresses, each one for the 10 and the 100 Mbits ports
All its OK.
But when I disconnect the cable from the FEC port is the other port that
answers the Pings ???
Thats Wierd.
Suggestions Welcome...
Regards
Arturo Nunez
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-03-20 1:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-16 18:04 Problems Compiling 2_4 for 860 Arturo Nunez
2001-03-19 22:01 ` Cal Erickson
2001-03-20 1:12 ` Arturo Nunez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox