* [PATCH] Add 85xx DTS files
@ 2006-08-18 1:26 Andy Fleming
2006-08-18 19:14 ` Sergei Shtylyov
0 siblings, 1 reply; 2+ messages in thread
From: Andy Fleming @ 2006-08-18 1:26 UTC (permalink / raw)
To: Paul Mackerras, linuxppc-dev
Added the DTS files for the 8540 ADS, and the 8555/41/48 CDS
Signed-of-by: Andy Fleming <afleming@freescale•com>
---
arch/powerpc/boot/dts/mpc8540ads.dts | 250 ++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8541cds.dts | 244 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8548cds.dts | 287 ++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8555cds.dts | 244 +++++++++++++++++++++++++++++
4 files changed, 1025 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
new file mode 100644
index 0000000..88b0ea7
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -0,0 +1,250 @@
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8540ADS";
+ compatible = "MPC85xxADS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8540@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ linux,boot-cpu;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8540@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 3>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 3>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "FEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <19 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x02 */
+ 1000 0 0 1 40000 31 1
+ 1000 0 0 2 40000 32 1
+ 1000 0 0 3 40000 33 1
+ 1000 0 0 4 40000 34 1
+
+ /* IDSEL 0x03 */
+ 1800 0 0 1 40000 34 1
+ 1800 0 0 2 40000 31 1
+ 1800 0 0 3 40000 32 1
+ 1800 0 0 4 40000 33 1
+
+ /* IDSEL 0x04 */
+ 2000 0 0 1 40000 33 1
+ 2000 0 0 2 40000 34 1
+ 2000 0 0 3 40000 31 1
+ 2000 0 0 4 40000 32 1
+
+ /* IDSEL 0x05 */
+ 2800 0 0 1 40000 32 1
+ 2800 0 0 2 40000 33 1
+ 2800 0 0 3 40000 34 1
+ 2800 0 0 4 40000 31 1
+
+ /* IDSEL 0x0c */
+ 6000 0 0 1 40000 31 1
+ 6000 0 0 2 40000 32 1
+ 6000 0 0 3 40000 33 1
+ 6000 0 0 4 40000 34 1
+
+ /* IDSEL 0x0d */
+ 6800 0 0 1 40000 34 1
+ 6800 0 0 2 40000 31 1
+ 6800 0 0 3 40000 32 1
+ 6800 0 0 4 40000 33 1
+
+ /* IDSEL 0x0e */
+ 7000 0 0 1 40000 33 1
+ 7000 0 0 2 40000 34 1
+ 7000 0 0 3 40000 31 1
+ 7000 0 0 4 40000 32 1
+
+ /* IDSEL 0x0f */
+ 7800 0 0 1 40000 32 1
+ 7800 0 0 2 40000 33 1
+ 7800 0 0 3 40000 34 1
+ 7800 0 0 4 40000 31 1
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 40000 31 1
+ 9000 0 0 2 40000 32 1
+ 9000 0 0 3 40000 33 1
+ 9000 0 0 4 40000 34 1
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 40000 34 1
+ 9800 0 0 2 40000 31 1
+ 9800 0 0 3 40000 32 1
+ 9800 0 0 4 40000 33 1
+
+ /* IDSEL 0x14 */
+ a000 0 0 1 40000 33 1
+ a000 0 0 2 40000 34 1
+ a000 0 0 3 40000 31 1
+ a000 0 0 4 40000 32 1
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 32 1
+ a800 0 0 2 40000 33 1
+ a800 0 0 3 40000 34 1
+ a800 0 0 4 40000 31 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 3>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
new file mode 100644
index 0000000..d526397
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8541CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8541@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8541@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
new file mode 100644
index 0000000..ec1446a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -0,0 +1,287 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8548CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8548@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ ethernet-phy@2 {
+ linux,phandle = <2452002>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <f 2 10 2 11 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+/* eTSEC 4 is currently broken
+ ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <27000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 03 ];
+ interrupts = <15 2 16 2 17 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+ */
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
new file mode 100644
index 0000000..71fea14
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8555CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8555@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8555@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <0d 2 0e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
--
2006_06_07.01.gittree_pull-dirty
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] Add 85xx DTS files
2006-08-18 1:26 [PATCH] Add 85xx DTS files Andy Fleming
@ 2006-08-18 19:14 ` Sergei Shtylyov
0 siblings, 0 replies; 2+ messages in thread
From: Sergei Shtylyov @ 2006-08-18 19:14 UTC (permalink / raw)
To: Andy Fleming; +Cc: linuxppc-dev
Hello.
Andy Fleming wrote:
> Added the DTS files for the 8540 ADS, and the 8555/41/48 CDS
MPC8540ADS file doesn't seem completely correct.
> diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
> new file mode 100644
> index 0000000..88b0ea7
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mpc8540ads.dts
> @@ -0,0 +1,250 @@
[...]
> + soc8540@e0000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + #interrupt-cells = <2>;
> + device_type = "soc";
> + ranges = <0 e0000000 00100000>;
> + reg = <e0000000 00100000>; // CCSRBAR 1M
> + bus-frequency = <0>;
> +
> + i2c@3000 {
> + device_type = "i2c";
> + compatible = "fsl-i2c";
> + reg = <3000 100>;
> + interrupts = <1b 2>;
This means active high interrupt, doesn't it? So,
Documentation/powerpc/booting=without-of.txt should be indeed wrong on the
OpenPIC IRQ sense encoding... The kernel doesn't seem to put any attention to
theis field currently though...
> + interrupt-parent = <40000>;
> + dfsrr;
> + };
> +
> + mdio@24520 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + device_type = "mdio";
> + compatible = "gianfar";
> + reg = <24520 20>;
> + linux,phandle = <24520>;
> + ethernet-phy@0 {
> + linux,phandle = <2452000>;
> + interrupt-parent = <40000>;
> + interrupts = <35 3>;
Falling edge?
> + reg = <0>;
> + device_type = "ethernet-phy";
> + };
> + ethernet-phy@1 {
> + linux,phandle = <2452001>;
> + interrupt-parent = <40000>;
> + interrupts = <35 3>;
> + reg = <1>;
> + device_type = "ethernet-phy";
> + };
The board has 2 more PHYs using IRQ54 (0x37).
> + ethernet@26000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + device_type = "network";
> + model = "FEC";
> + compatible = "gianfar";
> + reg = <26000 1000>;
> + local-mac-address = [ 00 E0 0C 00 73 02 ];
> + interrupts = <19 2>;
> + interrupt-parent = <40000>;
> + phy-handle = <2452001>;
> + };
This doesn't seem correct. FEC is served by PHY #3 (Davicom), not PHY #1
(Marvell).
[...]
> + pci@8000 {
> + linux,phandle = <8000>;
> + interrupt-map-mask = <f800 0 0 7>;
> + interrupt-map = <
> +
> + /* IDSEL 0x02 */
> + 1000 0 0 1 40000 31 1
> + 1000 0 0 2 40000 32 1
> + 1000 0 0 3 40000 33 1
> + 1000 0 0 4 40000 34 1
> +
> + /* IDSEL 0x03 */
> + 1800 0 0 1 40000 34 1
> + 1800 0 0 2 40000 31 1
> + 1800 0 0 3 40000 32 1
> + 1800 0 0 4 40000 33 1
> +
> + /* IDSEL 0x04 */
> + 2000 0 0 1 40000 33 1
> + 2000 0 0 2 40000 34 1
> + 2000 0 0 3 40000 31 1
> + 2000 0 0 4 40000 32 1
> +
> + /* IDSEL 0x05 */
> + 2800 0 0 1 40000 32 1
> + 2800 0 0 2 40000 33 1
> + 2800 0 0 3 40000 34 1
> + 2800 0 0 4 40000 31 1
> +
> + /* IDSEL 0x0c */
> + 6000 0 0 1 40000 31 1
> + 6000 0 0 2 40000 32 1
> + 6000 0 0 3 40000 33 1
> + 6000 0 0 4 40000 34 1
> +
> + /* IDSEL 0x0d */
> + 6800 0 0 1 40000 34 1
> + 6800 0 0 2 40000 31 1
> + 6800 0 0 3 40000 32 1
> + 6800 0 0 4 40000 33 1
> +
> + /* IDSEL 0x0e */
> + 7000 0 0 1 40000 33 1
> + 7000 0 0 2 40000 34 1
> + 7000 0 0 3 40000 31 1
> + 7000 0 0 4 40000 32 1
> +
> + /* IDSEL 0x0f */
> + 7800 0 0 1 40000 32 1
> + 7800 0 0 2 40000 33 1
> + 7800 0 0 3 40000 34 1
> + 7800 0 0 4 40000 31 1
> +
> + /* IDSEL 0x12 */
> + 9000 0 0 1 40000 31 1
> + 9000 0 0 2 40000 32 1
> + 9000 0 0 3 40000 33 1
> + 9000 0 0 4 40000 34 1
> +
> + /* IDSEL 0x13 */
> + 9800 0 0 1 40000 34 1
> + 9800 0 0 2 40000 31 1
> + 9800 0 0 3 40000 32 1
> + 9800 0 0 4 40000 33 1
> +
> + /* IDSEL 0x14 */
> + a000 0 0 1 40000 33 1
> + a000 0 0 2 40000 34 1
> + a000 0 0 3 40000 31 1
> + a000 0 0 4 40000 32 1
> +
> + /* IDSEL 0x15 */
> + a800 0 0 1 40000 32 1
> + a800 0 0 2 40000 33 1
> + a800 0 0 3 40000 34 1
> + a800 0 0 4 40000 31 1>;
> + interrupt-parent = <40000>;
> + interrupts = <08 3>;
Hm, why it's falling edge (if it is)? Isn't it an internal IRQ which are
all active high?
> + bus-range = <0 0>;
> + ranges = <02000000 0 80000000 80000000 0 20000000
> + 01000000 0 00000000 e2000000 0 00100000>;
Well, U-Boot sets up 16 MB I/O window, not 1 MB. Or have this changed?
> + clock-frequency = <3f940aa>;
> + #interrupt-cells = <1>;
> + #size-cells = <2>;
> + #address-cells = <3>;
> + reg = <8000 1000>;
> + compatible = "85xx";
> + device_type = "pci";
> + };
Well, these props should probaby come the first in the node, for clarity...
WBR, Sergei
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-08-18 19:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-18 1:26 [PATCH] Add 85xx DTS files Andy Fleming
2006-08-18 19:14 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox