* SPI INT line
@ 2007-09-14 19:26 Nicholas Hickman
2007-09-15 13:42 ` Clemens Koller
0 siblings, 1 reply; 2+ messages in thread
From: Nicholas Hickman @ 2007-09-14 19:26 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
We are developing a system around the mpc8270. On this system we are
using an ISDN controller connected to the SPI interface of the 8270.
For the INT line coming from the controller, should this be connected to
one of the IRQ lines that we typically use for PCI bus, or should we
connect it to one of the GPIO Group C pins? Currently we have it to
IRQ4, but I am worried that this is incorrect.
Thanks in advance.
Nicholas Hickman
[-- Attachment #2: Type: text/html, Size: 1235 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: SPI INT line
2007-09-14 19:26 SPI INT line Nicholas Hickman
@ 2007-09-15 13:42 ` Clemens Koller
0 siblings, 0 replies; 2+ messages in thread
From: Clemens Koller @ 2007-09-15 13:42 UTC (permalink / raw)
To: Nicholas Hickman; +Cc: linuxppc-embedded
Nicholas Hickman schrieb:
> We are developing a system around the mpc8270. On this system we are
> using an ISDN controller connected to the SPI interface of the 8270.
> For the INT line coming from the controller, should this be connected to
> one of the IRQ lines that we typically use for PCI bus, or should we
> connect it to one of the GPIO Group C pins? Currently we have it to
> IRQ4, but I am worried that this is incorrect.
I would use an otherwise unused (even in reference 82xx platforms)
IRQ line and have a look into the kernel and see which
IRQs are free so minimize/eliminate extra patches.
Regards,
--
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-09-15 13:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-14 19:26 SPI INT line Nicholas Hickman
2007-09-15 13:42 ` Clemens Koller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox