* [patch 0/6] PS3 patches for 2.6.26
@ 2008-03-27 0:36 Geoff Levand
2008-03-28 16:53 ` [patch] PS3: Split device setup for static vs. dynamic devices Geoff Levand
0 siblings, 1 reply; 2+ messages in thread
From: Geoff Levand @ 2008-03-27 0:36 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev, jgarzik
Paul and Jeff,
This is a small set of PS3 patches for 2.6.26. Patches
1-5 are ready to apply to the powerpc tree.
Patch 6 for the network driver needs an ACK by Jeff.
[1/6] PS3: Fix unlikely typo in ps3_get_irq
[2/6] PS3: Add ps3_get_speid routine
[3/6] PS3: Bootwrapper improvements
[4/6] PS3: Save power in busy loops on halt
[5/6] PS3: Sys-manager Wake-on-LAN support
[6/6] PS3: Gelic network driver Wake-on-LAN support
-Geoff
--
^ permalink raw reply [flat|nested] 2+ messages in thread
* [patch] PS3: Split device setup for static vs. dynamic devices
2008-03-27 0:36 [patch 0/6] PS3 patches for 2.6.26 Geoff Levand
@ 2008-03-28 16:53 ` Geoff Levand
0 siblings, 0 replies; 2+ messages in thread
From: Geoff Levand @ 2008-03-28 16:53 UTC (permalink / raw)
To: paulus; +Cc: Geert Uytterhoeven, linuxppc-dev
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom•com>
Split the device setup code in ps3_register_repository_device() in two
routines:
1. ps3_setup_static_device(), to handle the setup of static devices in the
PS3 repository, which can be __init,
2. ps3_setup_dynamic_device(), to handle the setup of storage devices that
may appear later in the PS3 repository.
This fixes a few section mismatch warnings.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom•com>
Signed-off-by: Geoff Levand <geoffrey.levand@am•sony.com>
---
Hi Paul,
Here is another one for 2.6.26 that Geert just sent me. Please apply.
-Geoff
arch/powerpc/platforms/ps3/device-init.c | 78 ++++++++++++++++++-------------
1 file changed, 46 insertions(+), 32 deletions(-)
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -499,41 +499,14 @@ static int __init ps3_register_graphics_
}
/**
- * ps3_register_repository_device - Register a device from the repositiory info.
- *
+ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
*/
-static int ps3_register_repository_device(
- const struct ps3_repository_device *repo)
+static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
{
int result;
switch (repo->dev_type) {
- case PS3_DEV_TYPE_SB_GELIC:
- result = ps3_setup_gelic_device(repo);
- if (result) {
- pr_debug("%s:%d ps3_setup_gelic_device failed\n",
- __func__, __LINE__);
- }
- break;
- case PS3_DEV_TYPE_SB_USB:
-
- /* Each USB device has both an EHCI and an OHCI HC */
-
- result = ps3_setup_ehci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ehci_device failed\n",
- __func__, __LINE__);
- }
-
- result = ps3_setup_ohci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ohci_device failed\n",
- __func__, __LINE__);
- }
- break;
case PS3_DEV_TYPE_STOR_DISK:
result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
@@ -572,6 +545,48 @@ static int ps3_register_repository_devic
return result;
}
+/**
+ * ps3_setup_static_device - Setup a static device from the repository
+ */
+
+static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
+{
+ int result;
+
+ switch (repo->dev_type) {
+ case PS3_DEV_TYPE_SB_GELIC:
+ result = ps3_setup_gelic_device(repo);
+ if (result) {
+ pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+ case PS3_DEV_TYPE_SB_USB:
+
+ /* Each USB device has both an EHCI and an OHCI HC */
+
+ result = ps3_setup_ehci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+ __func__, __LINE__);
+ }
+
+ result = ps3_setup_ohci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+
+ default:
+ return ps3_setup_dynamic_device(repo);
+ }
+
+ return result;
+}
+
static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
{
struct ps3_repository_device repo;
@@ -601,7 +616,7 @@ found:
pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
__func__, __LINE__, bus_id, dev_id, retries);
- ps3_register_repository_device(&repo);
+ ps3_setup_dynamic_device(&repo);
return;
}
@@ -905,8 +920,7 @@ static int __init ps3_register_devices(v
ps3_register_graphics_devices();
- ps3_repository_find_devices(PS3_BUS_TYPE_SB,
- ps3_register_repository_device);
+ ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
ps3_register_sound_devices();
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-03-28 16:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-03-27 0:36 [patch 0/6] PS3 patches for 2.6.26 Geoff Levand
2008-03-28 16:53 ` [patch] PS3: Split device setup for static vs. dynamic devices Geoff Levand
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox