* [Question] PPC440EPx SMII ethernet
@ 2009-04-22 21:44 Steven A. Falco
0 siblings, 0 replies; only message in thread
From: Steven A. Falco @ 2009-04-22 21:44 UTC (permalink / raw)
To: linuxppc-dev@ozlabs•org
We have built a new board based on the PPC440EPx. We are
using an SMII-mode phy for the ethernet.
The .dts file started as the one for Sequoia, and I have
changed the phy specifier to phy-mode = "smii" - I've also
removed the has-mdio property from RGMII0. The ethernet
is working in U-Boot, but when Linux tries to start the
emac I get:
PPC 4xx OCP EMAC driver, version 3.54
MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels
ZMII /plb/opb/emac-zmii@ef600d00 initialized
RGMII /plb/opb/emac-rgmii@ef601000 initialized without MDIO support
/plb/opb/emac-zmii@ef600d00: bridge in SMII mode
/plb/opb/emac-rgmii@ef601000: unsupported settings !
/plb/opb/emac-rgmii@ef601000: unsupported settings !
and the ethernet is not functional. I don't see any
example .dts files for smii mode. If anyone can tell me
what the .dts settings should be for this configuration,
I'd appreciate it.
The kernel version is 2.6.28.7 - I know that is a bit old
now, but hopefully I can still make progress with it.
Here is the whole .dts section for reference:
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440epx", "ibm,zmii";
reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601000 {
compatible = "ibm,rgmii-440epx", "ibm,rgmii";
reg = <0xef601000 0x00000008>;
/* has-mdio; */
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
/*Wake*/ 0x1 &UIC1 0x1d 0x4>;
reg = <0xef600e00 0x00000074>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "smii";
phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-04-22 21:44 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-04-22 21:44 [Question] PPC440EPx SMII ethernet Steven A. Falco
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox