From: Steven King <sfking@fdwdc•com>
To: netdev@vger•kernel.org
Cc: uClinux development list <uclinux-dev@uclinux•org>,
Greg Ungerer <gerg@snapgear•com>
Subject: [PATCH net-next] fec: Add support for Coldfire M5441x enet-mac.
Date: Wed, 6 Jun 2012 10:06:20 -0700 [thread overview]
Message-ID: <201206061006.21288.sfking@fdwdc.com> (raw)
Add support for the Freescale Coldfire M5441x; as these parts have an
enet-mac, add a quirk to distinguish them from the other Coldfire parts so we
can use the existing enet-mac support.
Signed-off-by: Steven king <sfking@fdwdc•com>
---
drivers/net/ethernet/freescale/Kconfig | 5 ++---
drivers/net/ethernet/freescale/fec.c | 6 +++++-
drivers/net/ethernet/freescale/fec.h | 3 ++-
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 3574e14..f9aa244 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_FREESCALE
default y
depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
+ M5441x || ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -22,8 +22,7 @@ if NET_VENDOR_FREESCALE
config FEC
tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || SOC_IMX28)
+ depends on (M523x || M527x || M5272 || M528x || M520x || M532x || M5441x || ARCH_MXC || SOC_IMX28)
default ARCH_MXC || SOC_IMX28 if ARM
select PHYLIB
---help---
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index ff7f4c5..9567667 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -94,6 +94,9 @@ static struct platform_device_id fec_devtype[] = {
.name = "imx6q-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT,
}, {
+ .name = "enet-fec",
+ .driver_data = FEC_QUIRK_ENET_MAC,
+ }, {
/* sentinel */
}
};
@@ -187,7 +190,8 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
+ defined(CONFIG_M5441x)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 8408c62..298cfb7 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -15,7 +15,8 @@
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
- defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+ defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) || \
+ defined(CONFIG_M5441x)
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
next reply other threads:[~2012-06-06 17:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 17:06 Steven King [this message]
2012-06-06 17:34 ` [PATCH net-next] fec: Add support for Coldfire M5441x enet-mac Jan Ceuleers
2012-06-06 20:05 ` Steven King
2012-06-07 21:47 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206061006.21288.sfking@fdwdc.com \
--to=sfking@fdwdc$(echo .)com \
--cc=gerg@snapgear$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=uclinux-dev@uclinux$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox