From: Andrew Lunn <andrew@lunn•ch>
To: Petr Kulhavy <petr@barix•com>
Cc: netdev@vger•kernel.org
Subject: Re: davinci-mdio: failing to connect to PHY
Date: Mon, 4 Apr 2016 14:31:45 +0200 [thread overview]
Message-ID: <20160404123145.GE21828@lunn.ch> (raw)
In-Reply-To: <57022356.6010309@barix.com>
On Mon, Apr 04, 2016 at 10:18:30AM +0200, Petr Kulhavy wrote:
> Hi,
>
> I'm experiencing a peculiar problem with PHY communication in the
> current davinci-mdio.c driver.
> After upgrading from kernel 3.17 to 4.5 my DT based AM1808 board
> started having issues with the PHY communication.
> The MAC is detected, the MDIO is detected, the PHY is detected
> (twice?!?!), however there is no data being sent/received and the
> after issuing "ifdown -a" the MDIO starts spitting out messages that
> it cannot connect to the PHY:
>
> net eth0: could not connect to phy davinci_mdio.0:00
> davinci_mdio davinci_mdio.0: resetting idled controller
>
>
> I'm using a single Micrel KSZ8081 PHY connected via RMII using the
> default PHY address 0x01.
> Here is the dmesg excerpt related to mdio:
>
> davinci_mdio davinci_mdio.0: Runtime PM disabled, clock forced on.
> davinci_mdio davinci_mdio.0: davinci mdio revision 1.5
> davinci_mdio davinci_mdio.0: detected phy mask fffffffc
> libphy: davinci_mdio.0: probed
> davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00,
> driver Micrel KSZ8081 or KSZ8091
> davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01,
> driver Micrel KSZ8081 or KSZ8091
> davinci_mdio davinci_mdio.0: resetting idled controller
> Micrel KSZ8081 or KSZ8091 davinci_mdio.0:00: failed to disable NAND
> tree mode
> Micrel KSZ8081 or KSZ8091 davinci_mdio.0:00: attached PHY driver
> [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=davinci_mdio.0:00,
> irq=-1)
>
>
> After a soft-reboot the MDIO uses a different PHY mask fffffffd,
> detects correctly only one PHY at address 1 (this is the default
> address) and the networking works:
Hi Petr
You might want to take a look at:
http://lxr.free-electrons.com/source/drivers/net/ethernet/ti/davinci_mdio.c#L137
It seems to be asking the hardware about the phy mask.
Andrew
next prev parent reply other threads:[~2016-04-04 12:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 8:18 davinci-mdio: failing to connect to PHY Petr Kulhavy
2016-04-04 12:31 ` Andrew Lunn [this message]
2016-04-04 13:50 ` Petr Kulhavy
2016-04-04 13:58 ` Andrew Lunn
2016-04-04 14:01 ` Petr Kulhavy
-- strict thread matches above, loose matches on Subject: below --
2016-04-01 15:24 Petr Kulhavy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160404123145.GE21828@lunn.ch \
--to=andrew@lunn$(echo .)ch \
--cc=netdev@vger$(echo .)kernel.org \
--cc=petr@barix$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox