From: Eric Dumazet <dada1@cosmosbay•com>
To: David Miller <davem@davemloft•net>
Cc: Vitaly Mayatskikh <v.mayatskih@gmail•com>, netdev@vger•kernel.org
Subject: [PATCH] udp: optimize bind(0) if many ports are in use
Date: Mon, 26 Jan 2009 09:20:31 +0100 [thread overview]
Message-ID: <497D724F.3070902@cosmosbay.com> (raw)
In-Reply-To: <4979C9B6.3080302@cosmosbay.com>
Hello David
Here is last patch about performance regression of UDP bind() to random port.
Change against previous one is the divide, that can be replaced by a multiply,
as already done in other parts of kernel.
ie instead of doing : "first = rand % remaining + low;" we can use :
first = (((u64)rand * remaining) >> 32) + low;
Also some polishing about too long lines and comments before official submission.
Thank you
[PATCH] udp: optimize bind(0) if many ports are in use
commit 9088c5609584684149f3fb5b065aa7f18dcb03ff
(udp: Improve port randomization) introduced a regression for UDP bind() syscall
to null port (getting a random port) in case lot of ports are already in use.
This is because we do about 28000 scans of very long chains (220 sockets per chain),
with many spin_lock_bh()/spin_unlock_bh() calls.
Fix this using a bitmap (64 bytes for current value of UDP_HTABLE_SIZE)
so that we scan chains at most once.
Instead of 250 ms per bind() call, we get after patch a time of 2.9 ms
Based on a report from Vitaly Mayatskikh
Reported-by: Vitaly Mayatskikh <v.mayatskih@gmail•com>
Signed-off-by: Eric Dumazet <dada1@cosmosbay•com>
Tested-by: Vitaly Mayatskikh <v.mayatskih@gmail•com>
---
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index cf5ab05..b7faffe 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -120,8 +120,11 @@ EXPORT_SYMBOL(sysctl_udp_wmem_min);
atomic_t udp_memory_allocated;
EXPORT_SYMBOL(udp_memory_allocated);
+#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE)
+
static int udp_lib_lport_inuse(struct net *net, __u16 num,
const struct udp_hslot *hslot,
+ unsigned long *bitmap,
struct sock *sk,
int (*saddr_comp)(const struct sock *sk1,
const struct sock *sk2))
@@ -132,12 +135,17 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num,
sk_nulls_for_each(sk2, node, &hslot->head)
if (net_eq(sock_net(sk2), net) &&
sk2 != sk &&
- sk2->sk_hash == num &&
+ (bitmap || sk2->sk_hash == num) &&
(!sk2->sk_reuse || !sk->sk_reuse) &&
(!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if
|| sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
- (*saddr_comp)(sk, sk2))
- return 1;
+ (*saddr_comp)(sk, sk2)) {
+ if (bitmap)
+ __set_bit(sk2->sk_hash / UDP_HTABLE_SIZE,
+ bitmap);
+ else
+ return 1;
+ }
return 0;
}
@@ -160,32 +168,47 @@ int udp_lib_get_port(struct sock *sk, unsigned short snum,
if (!snum) {
int low, high, remaining;
unsigned rand;
- unsigned short first;
+ unsigned short first, last;
+ DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN);
inet_get_local_port_range(&low, &high);
remaining = (high - low) + 1;
rand = net_random();
- snum = first = rand % remaining + low;
- rand |= 1;
- for (;;) {
- hslot = &udptable->hash[udp_hashfn(net, snum)];
+ first = (((u64)rand * remaining) >> 32) + low;
+ /*
+ * force rand to be an odd multiple of UDP_HTABLE_SIZE
+ */
+ rand = (rand | 1) * UDP_HTABLE_SIZE;
+ for (last = first + UDP_HTABLE_SIZE; first != last; first++) {
+ hslot = &udptable->hash[udp_hashfn(net, first)];
+ bitmap_zero(bitmap, PORTS_PER_CHAIN);
spin_lock_bh(&hslot->lock);
- if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
- break;
- spin_unlock_bh(&hslot->lock);
+ udp_lib_lport_inuse(net, snum, hslot, bitmap, sk,
+ saddr_comp);
+
+ snum = first;
+ /*
+ * Iterate on all possible values of snum for this hash.
+ * Using steps of an odd multiple of UDP_HTABLE_SIZE
+ * give us randomization and full range coverage.
+ */
do {
- snum = snum + rand;
- } while (snum < low || snum > high);
- if (snum == first)
- goto fail;
+ if (low <= snum && snum <= high &&
+ !test_bit(snum / UDP_HTABLE_SIZE, bitmap))
+ goto found;
+ snum += rand;
+ } while (snum != first);
+ spin_unlock_bh(&hslot->lock);
}
+ goto fail;
} else {
hslot = &udptable->hash[udp_hashfn(net, snum)];
spin_lock_bh(&hslot->lock);
- if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
+ if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp))
goto fail_unlock;
}
+found:
inet_sk(sk)->num = snum;
sk->sk_hash = snum;
if (sk_unhashed(sk)) {
next prev parent reply other threads:[~2009-01-26 8:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-22 18:49 speed regression in udp_lib_lport_inuse() Vitaly Mayatskikh
2009-01-22 22:06 ` Eric Dumazet
2009-01-22 22:14 ` Evgeniy Polyakov
2009-01-23 0:20 ` Eric Dumazet
2009-01-22 22:40 ` Vitaly Mayatskikh
2009-01-23 0:14 ` Eric Dumazet
2009-01-23 9:42 ` Vitaly Mayatskikh
2009-01-23 11:45 ` Eric Dumazet
2009-01-23 13:44 ` Eric Dumazet
2009-01-23 14:56 ` Vitaly Mayatskikh
2009-01-23 16:05 ` Eric Dumazet
2009-01-23 16:14 ` Vitaly Mayatskikh
2009-01-26 8:20 ` Eric Dumazet [this message]
2009-01-27 5:35 ` [PATCH] udp: optimize bind(0) if many ports are in use David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=497D724F.3070902@cosmosbay.com \
--to=dada1@cosmosbay$(echo .)com \
--cc=davem@davemloft$(echo .)net \
--cc=netdev@vger$(echo .)kernel.org \
--cc=v.mayatskih@gmail$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox