* [MeeGo-Dev] can: How to set bitrate
@ 2010-10-18 10:56 Masayuki Ohtake
0 siblings, 0 replies; 3+ messages in thread
From: Masayuki Ohtake @ 2010-10-18 10:56 UTC (permalink / raw)
To: Wolfgang Grandegger, David S. Miller, Wolfram Sang,
Christian Pellegrin, "Barry Song" <2
Cc: andrew.chih.howe.khor, Wang, Qi, Foster, Margie, Wang, Yong Y,
Ewe, Kok Howg, Tomoya MORINAGA, Intel OTC
I want to test our Socket CAN driver(for Topcliff) on Meego1.0.
For setting bitrate, I tried to install "iproute2". But the build failed.
================================================
[root@localhost iproute2-2.6.33]# make
sh configure
TC schedulers
ATM no
IPT using iptables
make[1]: Entering directory `/root/iproute2-2.6.33/lib'
<omission>
ude -o arpd arpd.c ../lib/libnetlink.a ../lib/libutil.a -ldb -lpthread
arpd.c:19:20: error: db_185.h: No such file or directory
arpd.c:42: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
arpd.c: In function 'do_one_request':
arpd.c:304: error: 'DBT' undeclared (first use in this function)
arpd.c:304: error: (Each undeclared identifier is reported only once
arpd.c:304: error: for each function it appears in.)
arpd.c:304: error: expected ';' before 'dbkey'
arpd.c:308: error: 'dbase' undeclared (first use in this function)
arpd.c:338: error: 'dbkey' undeclared (first use in this function)
arpd.c:341: error: 'dbdat' undeclared (first use in this function)
arpd.c: In function 'get_arp_pkt':
arpd.c:485: error: 'DBT' undeclared (first use in this function)
arpd.c:485: error: expected ';' before 'dbkey'
arpd.c:517: error: 'dbkey' undeclared (first use in this function)
arpd.c:520: error: 'dbase' undeclared (first use in this function)
arpd.c:520: error: 'dbdat' undeclared (first use in this function)
arpd.c: In function 'main':
arpd.c:670: error: 'dbase' undeclared (first use in this function)
arpd.c:670: warning: implicit declaration of function 'dbopen'
arpd.c:670: error: 'DB_HASH' undeclared (first use in this function)
arpd.c:680: error: 'DBT' undeclared (first use in this function)
arpd.c:680: error: expected ';' before 'dbkey'
arpd.c:682: error: 'dbkey' undeclared (first use in this function)
arpd.c:712: error: 'dbdat' undeclared (first use in this function)
arpd.c:728: error: expected ';' before 'dbkey'
arpd.c:730: error: 'R_NEXT' undeclared (first use in this function)
make[1]: *** [arpd] Error 1
make[1]: Leaving directory `/root/iproute2/misc'
make: *** [all] Error 2
[root@localhost iproute2]#
================================================
Do you know how to set bitrate on Meego?
Thanks, Ohtake(OKISemi)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [MeeGo-Dev] can: How to set bitrate
[not found] ` <000b01cb6eb3$1afcfd60$66f8800a-a06+6cuVnkTSQfdrb5gaxUEOCMrvLtNR@public.gmane.org>
@ 2010-10-18 11:05 ` Wolfgang Grandegger
2010-10-19 0:09 ` Masayuki Ohtake
0 siblings, 1 reply; 3+ messages in thread
From: Wolfgang Grandegger @ 2010-10-18 11:05 UTC (permalink / raw)
To: Masayuki Ohtake
Cc: andrew.chih.howe.khor-ral2JQCrhuEAvxtiuMwx3w, Samuel Ortiz,
Foster, Margie, ML netdev, ML linux-kernel,
socketcan-core-0fE9KPoRgkgATYTw5x5z8w, Wang, Yong Y,
Ewe, Kok Howg, Intel OTC, Tomoya MORINAGA, David S. Miller,
Christian Pellegrin, Wang, Qi
On 10/18/2010 12:56 PM, Masayuki Ohtake wrote:
> I want to test our Socket CAN driver(for Topcliff) on Meego1.0.
>
> For setting bitrate, I tried to install "iproute2". But the build failed.
>
> ================================================
> [root@localhost iproute2-2.6.33]# make
> sh configure
> TC schedulers
> ATM no
> IPT using iptables
> make[1]: Entering directory `/root/iproute2-2.6.33/lib'
>
> <omission>
>
> ude -o arpd arpd.c ../lib/libnetlink.a ../lib/libutil.a -ldb -lpthread
> arpd.c:19:20: error: db_185.h: No such file or directory
> arpd.c:42: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
> arpd.c: In function 'do_one_request':
> arpd.c:304: error: 'DBT' undeclared (first use in this function)
> arpd.c:304: error: (Each undeclared identifier is reported only once
> arpd.c:304: error: for each function it appears in.)
> arpd.c:304: error: expected ';' before 'dbkey'
> arpd.c:308: error: 'dbase' undeclared (first use in this function)
> arpd.c:338: error: 'dbkey' undeclared (first use in this function)
> arpd.c:341: error: 'dbdat' undeclared (first use in this function)
> arpd.c: In function 'get_arp_pkt':
> arpd.c:485: error: 'DBT' undeclared (first use in this function)
> arpd.c:485: error: expected ';' before 'dbkey'
> arpd.c:517: error: 'dbkey' undeclared (first use in this function)
> arpd.c:520: error: 'dbase' undeclared (first use in this function)
> arpd.c:520: error: 'dbdat' undeclared (first use in this function)
> arpd.c: In function 'main':
> arpd.c:670: error: 'dbase' undeclared (first use in this function)
> arpd.c:670: warning: implicit declaration of function 'dbopen'
> arpd.c:670: error: 'DB_HASH' undeclared (first use in this function)
> arpd.c:680: error: 'DBT' undeclared (first use in this function)
> arpd.c:680: error: expected ';' before 'dbkey'
> arpd.c:682: error: 'dbkey' undeclared (first use in this function)
> arpd.c:712: error: 'dbdat' undeclared (first use in this function)
> arpd.c:728: error: expected ';' before 'dbkey'
> arpd.c:730: error: 'R_NEXT' undeclared (first use in this function)
> make[1]: *** [arpd] Error 1
> make[1]: Leaving directory `/root/iproute2/misc'
> make: *** [all] Error 2
> [root@localhost iproute2]#
> ================================================
On my system I get:
~$ rpm -qf /usr/include/db_185.h
db4-devel-4.7.25-13.fc12.i686
Which means you need db4 devel to fully build iproute2.
> Do you know how to set bitrate on Meego?
ip from iproute2 is the right tool.
Wolfgang.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [MeeGo-Dev] can: How to set bitrate
2010-10-18 11:05 ` [MeeGo-Dev] can: How to set bitrate Wolfgang Grandegger
@ 2010-10-19 0:09 ` Masayuki Ohtake
0 siblings, 0 replies; 3+ messages in thread
From: Masayuki Ohtake @ 2010-10-19 0:09 UTC (permalink / raw)
To: Wolfgang Grandegger
Cc: andrew.chih.howe.khor-ral2JQCrhuEAvxtiuMwx3w, Samuel Ortiz,
Foster, Margie, ML netdev, ML linux-kernel,
socketcan-core-0fE9KPoRgkgATYTw5x5z8w, Wang, Yong Y,
Ewe, Kok Howg, Intel OTC, Tomoya MORINAGA, David S. Miller,
Christian Pellegrin, Wang, Qi
On Monday, October 18, 2010 8:05 PM, Wolfgang Grandegger wrote:
> ~$ rpm -qf /usr/include/db_185.h
> db4-devel-4.7.25-13.fc12.i686
>
> Which means you need db4 devel to fully build iproute2.
Thank you for your information.
Using the following command,
"yum install db4*"
I could confirm building iproute2 is success and
set bitrate.
Thanks, Ohtake(OKISemi)
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-19 0:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <000b01cb6eb3$1afcfd60$66f8800a@maildom.okisemi.com>
[not found] ` <000b01cb6eb3$1afcfd60$66f8800a-a06+6cuVnkTSQfdrb5gaxUEOCMrvLtNR@public.gmane.org>
2010-10-18 11:05 ` [MeeGo-Dev] can: How to set bitrate Wolfgang Grandegger
2010-10-19 0:09 ` Masayuki Ohtake
2010-10-18 10:56 Masayuki Ohtake
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox