* Re: [PATCH 00/28 v6] m68k: Convert to genirq [not found] ` <CAMuHMdWOhKcoDoyTnKJzruZ=gpV5uKNFpXnGCkrac7oEkCihJw@mail.gmail.com> @ 2011-10-23 9:49 ` Geert Uytterhoeven 2011-10-23 11:29 ` Greg Ungerer 0 siblings, 1 reply; 3+ messages in thread From: Geert Uytterhoeven @ 2011-10-23 9:49 UTC (permalink / raw) To: linux-m68k, Greg Ungerer, Thomas Gleixner; +Cc: linux-kernel, netdev On Thu, Oct 20, 2011 at 14:18, Geert Uytterhoeven <geert@linux-m68k•org> wrote: > On Sun, Sep 11, 2011 at 13:59, Geert Uytterhoeven <geert@linux-m68k•org> wrote: >> This patch series converts the m68k/mmu (nommu was converted before) >> architecture to the generic hardirq framework. >> >> - [01/28] genirq: Add missing "else" in irq_shutdown() >> - [02/28] ide-{cd,floppy,tape}: Do not include <linux/irq.> >> - [03/28] keyboard: Do not include <linux/irq.> >> - [04/28] m68k/irq: Rename irq_controller to irq_chip >> - [05/28] m68k/irq: Kill irq_node_t typedef, always use struct irq_node >> - [06/28] m68k/irq: Rename irq_node to irq_data >> - [07/28] m68k/irq: Switch irq_chip methods to "struct irq_data *data" >> - [08/28] m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it static >> - [09/28] m68k/irq: Extract irq_set_chip() >> - [10/28] m68k/irq: Add m68k_setup_irq_controller() >> - [11/28] m68k/irq: Rename {,__}m68k_handle_int() >> - [12/28] m68k/irq: Remove obsolete IRQ_FLG_* definitions and users >> - [13/28] m68k/irq: Add genirq support >> - [14/28] m68k/atari: Convert Atari to genirq >> - [15/28] m68k/atari: Remove code and comments about different irq types >> - [16/28] m68k/amiga: Refactor amiints.c >> - [17/28] m68k/amiga: Convert Amiga to genirq >> - [18/28] m68k/amiga: Optimize interrupts using chain handlers >> - [19/28] m68k/mac: Convert Mac to genirq >> - [20/28] m68k/mac: Optimize interrupts using chain handlers >> - [21/28] m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq >> - [22/28] m68k/vme: Convert VME to genirq >> - [23/28] m68k/apollo: Convert Apollo to genirq >> - [24/28] m68k/sun3: Use the kstat_irqs_cpu() wrapper >> - [25/28] m68k/sun3: Convert Sun3/3x to genirq >> - [26/28] m68k/q40: Convert Q40/Q60 to genirq >> - [27/28] m68k/irq: Remove obsolete m68k irq framework >> - [28/28] m68k/irq: Remove obsolete support for user vector interrupt fixups >> >> Overview: >> - [01] is a fix for the core genirq code, > > This went into v3.1-rc6. > >> - [02-03] are fixes to avoid compile problems later in the conversion >> process, > > The keyboard path went into the tty -next tree. > The IDE one is still pending (I've just resent it). The IDE one got acked in the mean time. >> I will update my m68k-genirq branch as soon as master.kernel.org is available >> again. > > Updated, on top of m68k master (which is at v3.1-rc10 now). > http://git.kernel.org/?p=linux/kernel/git/geert/linux-m68k.git;a=shortlog;h=refs/heads/m68k-genirq > > If noone objects, I'd like to add this to the m68k master and for-3.2 branches. I added it to m68k master. As there were several merge conflicts with current -next (arch/m68k/kernel/Makefile_mm due to the mmu/nommu merge, and drivers/net/macsonic.c in [12/28] due to the network driver reshuffling dance), I did not add it to for-3.2 and for-next, but to for-3.3. Depending on Stephen's return during or after the merge window, and the merge timing of the m68knommu and netdev trees, I may stil try to sneak it in 3.2, though. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k•org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 00/28 v6] m68k: Convert to genirq 2011-10-23 9:49 ` [PATCH 00/28 v6] m68k: Convert to genirq Geert Uytterhoeven @ 2011-10-23 11:29 ` Greg Ungerer 2011-10-23 12:12 ` Geert Uytterhoeven 0 siblings, 1 reply; 3+ messages in thread From: Greg Ungerer @ 2011-10-23 11:29 UTC (permalink / raw) To: Geert Uytterhoeven; +Cc: linux-m68k, Thomas Gleixner, linux-kernel, netdev Hi Geert, On 10/23/2011 07:49 PM, Geert Uytterhoeven wrote: > On Thu, Oct 20, 2011 at 14:18, Geert Uytterhoeven<geert@linux-m68k•org> wrote: >> On Sun, Sep 11, 2011 at 13:59, Geert Uytterhoeven<geert@linux-m68k•org> wrote: >>> This patch series converts the m68k/mmu (nommu was converted before) >>> architecture to the generic hardirq framework. >>> >>> á- [01/28] genirq: Add missing "else" in irq_shutdown() >>> á- [02/28] ide-{cd,floppy,tape}: Do not include<linux/irq.> >>> á- [03/28] keyboard: Do not include<linux/irq.> >>> á- [04/28] m68k/irq: Rename irq_controller to irq_chip >>> á- [05/28] m68k/irq: Kill irq_node_t typedef, always use struct irq_node >>> á- [06/28] m68k/irq: Rename irq_node to irq_data >>> á- [07/28] m68k/irq: Switch irq_chip methods to "struct irq_data *data" >>> á- [08/28] m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it static >>> á- [09/28] m68k/irq: Extract irq_set_chip() >>> á- [10/28] m68k/irq: Add m68k_setup_irq_controller() >>> á- [11/28] m68k/irq: Rename {,__}m68k_handle_int() >>> á- [12/28] m68k/irq: Remove obsolete IRQ_FLG_* definitions and users >>> á- [13/28] m68k/irq: Add genirq support >>> á- [14/28] m68k/atari: Convert Atari to genirq >>> á- [15/28] m68k/atari: Remove code and comments about different irq types >>> á- [16/28] m68k/amiga: Refactor amiints.c >>> á- [17/28] m68k/amiga: Convert Amiga to genirq >>> á- [18/28] m68k/amiga: Optimize interrupts using chain handlers >>> á- [19/28] m68k/mac: Convert Mac to genirq >>> á- [20/28] m68k/mac: Optimize interrupts using chain handlers >>> á- [21/28] m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq >>> á- [22/28] m68k/vme: Convert VME to genirq >>> á- [23/28] m68k/apollo: Convert Apollo to genirq >>> á- [24/28] m68k/sun3: Use the kstat_irqs_cpu() wrapper >>> á- [25/28] m68k/sun3: Convert Sun3/3x to genirq >>> á- [26/28] m68k/q40: Convert Q40/Q60 to genirq >>> á- [27/28] m68k/irq: Remove obsolete m68k irq framework >>> á- [28/28] m68k/irq: Remove obsolete support for user vector interrupt fixups >>> >>> Overview: >>> á- [01] is a fix for the core genirq code, >> >> This went into v3.1-rc6. >> >>> á- [02-03] are fixes to avoid compile problems later in the conversion >>> á áprocess, >> >> The keyboard path went into the tty -next tree. >> The IDE one is still pending (I've just resent it). > > The IDE one got acked in the mean time. > >>> I will update my m68k-genirq branch as soon as master.kernel.org is available >>> again. >> >> Updated, on top of m68k master (which is at v3.1-rc10 now). >> http://git.kernel.org/?p=linux/kernel/git/geert/linux-m68k.git;a=shortlog;h=refs/heads/m68k-genirq >> >> If noone objects, I'd like to add this to the m68k master and for-3.2 branches. > > I added it to m68k master. > > As there were several merge conflicts with current -next > (arch/m68k/kernel/Makefile_mm > due to the mmu/nommu merge, and drivers/net/macsonic.c in [12/28] due > to the network > driver reshuffling dance), I did not add it to for-3.2 and for-next, > but to for-3.3. > > Depending on Stephen's return during or after the merge window, and > the merge timing > of the m68knommu and netdev trees, I may stil try to sneak it in 3.2, though. I can ask Linus to pull the m68knommu tree early in the merge window, if that will help. Regards Greg ------------------------------------------------------------------------ Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear•com SnapGear Group, McAfee PHONE: +61 7 3435 2888 8 Gardner Close, FAX: +61 7 3891 3630 Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 00/28 v6] m68k: Convert to genirq 2011-10-23 11:29 ` Greg Ungerer @ 2011-10-23 12:12 ` Geert Uytterhoeven 0 siblings, 0 replies; 3+ messages in thread From: Geert Uytterhoeven @ 2011-10-23 12:12 UTC (permalink / raw) To: Greg Ungerer; +Cc: linux-m68k, Thomas Gleixner, linux-kernel, netdev On Sun, Oct 23, 2011 at 13:29, Greg Ungerer <gerg@snapgear•com> wrote: > On 10/23/2011 07:49 PM, Geert Uytterhoeven wrote: >> On Thu, Oct 20, 2011 at 14:18, Geert Uytterhoeven<geert@linux-m68k•org> >> wrote: >>> On Sun, Sep 11, 2011 at 13:59, Geert Uytterhoeven<geert@linux-m68k•org> >>> wrote: >>>> This patch series converts the m68k/mmu (nommu was converted before) >>>> architecture to the generic hardirq framework. >>>> >>>> á- [01/28] genirq: Add missing "else" in irq_shutdown() >>>> á- [02/28] ide-{cd,floppy,tape}: Do not include<linux/irq.> >>>> á- [03/28] keyboard: Do not include<linux/irq.> >>>> á- [04/28] m68k/irq: Rename irq_controller to irq_chip >>>> á- [05/28] m68k/irq: Kill irq_node_t typedef, always use struct >>>> irq_node >>>> á- [06/28] m68k/irq: Rename irq_node to irq_data >>>> á- [07/28] m68k/irq: Switch irq_chip methods to "struct irq_data *data" >>>> á- [08/28] m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it >>>> static >>>> á- [09/28] m68k/irq: Extract irq_set_chip() >>>> á- [10/28] m68k/irq: Add m68k_setup_irq_controller() >>>> á- [11/28] m68k/irq: Rename {,__}m68k_handle_int() >>>> á- [12/28] m68k/irq: Remove obsolete IRQ_FLG_* definitions and users >>>> á- [13/28] m68k/irq: Add genirq support >>>> á- [14/28] m68k/atari: Convert Atari to genirq >>>> á- [15/28] m68k/atari: Remove code and comments about different irq >>>> types >>>> á- [16/28] m68k/amiga: Refactor amiints.c >>>> á- [17/28] m68k/amiga: Convert Amiga to genirq >>>> á- [18/28] m68k/amiga: Optimize interrupts using chain handlers >>>> á- [19/28] m68k/mac: Convert Mac to genirq >>>> á- [20/28] m68k/mac: Optimize interrupts using chain handlers >>>> á- [21/28] m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq >>>> á- [22/28] m68k/vme: Convert VME to genirq >>>> á- [23/28] m68k/apollo: Convert Apollo to genirq >>>> á- [24/28] m68k/sun3: Use the kstat_irqs_cpu() wrapper >>>> á- [25/28] m68k/sun3: Convert Sun3/3x to genirq >>>> á- [26/28] m68k/q40: Convert Q40/Q60 to genirq >>>> á- [27/28] m68k/irq: Remove obsolete m68k irq framework >>>> á- [28/28] m68k/irq: Remove obsolete support for user vector interrupt >>>> fixups >>>> >>>> Overview: >>>> á- [01] is a fix for the core genirq code, >>> >>> This went into v3.1-rc6. >>> >>>> á- [02-03] are fixes to avoid compile problems later in the conversion >>>> á áprocess, >>> >>> The keyboard path went into the tty -next tree. >>> The IDE one is still pending (I've just resent it). >> >> The IDE one got acked in the mean time. >> >>>> I will update my m68k-genirq branch as soon as master.kernel.org is >>>> available >>>> again. >>> >>> Updated, on top of m68k master (which is at v3.1-rc10 now). >>> >>> http://git.kernel.org/?p=linux/kernel/git/geert/linux-m68k.git;a=shortlog;h=refs/heads/m68k-genirq >>> >>> If noone objects, I'd like to add this to the m68k master and for-3.2 >>> branches. >> >> I added it to m68k master. >> >> As there were several merge conflicts with current -next >> (arch/m68k/kernel/Makefile_mm >> due to the mmu/nommu merge, and drivers/net/macsonic.c in [12/28] due >> to the network >> driver reshuffling dance), I did not add it to for-3.2 and for-next, >> but to for-3.3. >> >> Depending on Stephen's return during or after the merge window, and >> the merge timing >> of the m68knommu and netdev trees, I may stil try to sneak it in 3.2, >> though. > > I can ask Linus to pull the m68knommu tree early in the merge window, > if that will help. Thanks, that will help. Then I can rebase on top of that. And I'll split "[12/28] m68k/irq: Remove obsolete IRQ_FLG_* definitions and users", so the net/scsi/tty parts can hit the repective trees separately. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k•org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-10-23 12:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1315742394-16036-1-git-send-email-geert@linux-m68k.org>
[not found] ` <CAMuHMdWOhKcoDoyTnKJzruZ=gpV5uKNFpXnGCkrac7oEkCihJw@mail.gmail.com>
2011-10-23 9:49 ` [PATCH 00/28 v6] m68k: Convert to genirq Geert Uytterhoeven
2011-10-23 11:29 ` Greg Ungerer
2011-10-23 12:12 ` Geert Uytterhoeven
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox