public inbox for netdev@vger.kernel.org 
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora•org>
To: mjr@cs•wisc.edu
Cc: fbl@redhat•com, davem@davemloft•net,
	Ben Dooks <ben-linux@fluff•org>,
	bhutchings@solarflare•com, netdev@vger•kernel.org
Subject: Re: [PATCH] ks8851: Fix missing mutex_lock/unlock
Date: Fri, 13 Apr 2012 10:46:28 -0700	[thread overview]
Message-ID: <4F886674.7050207@codeaurora.org> (raw)
In-Reply-To: <1334272530-11119-1-git-send-email-mjr@cs.wisc.edu>

On 04/12/12 16:15, mjr@cs•wisc.edu wrote:
> From: Matt Renzelmann <mjr@cs•wisc.edu>
>
> All calls to ks8851_rdreg* and ks8851_wrreg* should be protected with
> the driver's lock mutex.  A spurious interrupt may otherwise cause a
> crash. 

This doesn't make any sense anymore because you don't do any mutex things.

>  Thanks to Stephen Boyd, Flavio Leitner, and Ben Hutchings for
> feedback.
>
> Signed-off-by: Matt Renzelmann <mjr@cs•wisc.edu>
> ---
>
> This modified version incorporates Ben Hutchings' bugfix by removing
> the incorrect call to CIDER_REV_GET.
>
>  drivers/net/ethernet/micrel/ks8851.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
> index c722aa6..e5dc075 100644
> --- a/drivers/net/ethernet/micrel/ks8851.c
> +++ b/drivers/net/ethernet/micrel/ks8851.c
> @@ -1418,6 +1418,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
>  	struct net_device *ndev;
>  	struct ks8851_net *ks;
>  	int ret;
> +	unsigned cider;
>  
>  	ndev = alloc_etherdev(sizeof(struct ks8851_net));
>  	if (!ndev)
> @@ -1484,8 +1485,8 @@ static int __devinit ks8851_probe(struct spi_device *spi)
>  	ks8851_soft_reset(ks, GRR_GSR);
>  
>  	/* simple check for a valid chip being connected to the bus */
> -
> -	if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
> +	cider = ks8851_rdreg16(ks, KS_CIDER);
> +	if ((cider & ~CIDER_REV_MASK) != CIDER_ID) {
>  		dev_err(&spi->dev, "failed to read device ID\n");
>  		ret = -ENODEV;
>  		goto err_id;
> @@ -1516,8 +1517,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
>  	}
>  
>  	netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n",
> -		    CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
> -		    ndev->dev_addr, ndev->irq,
> +		    CIDER_REV_GET(cider), ndev->dev_addr, ndev->irq,
>  		    ks->rc_ccr & CCR_EEPROM ? "has" : "no");
>  
>  	return 0;

-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

  parent reply	other threads:[~2012-04-13 17:46 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-12 23:15 [PATCH] ks8851: Fix missing mutex_lock/unlock mjr
2012-04-13  0:22 ` Flavio Leitner
2012-04-13 17:46 ` Stephen Boyd [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-04-13 17:59 mjr
2012-04-13 18:05 ` David Miller
2012-04-12 21:28 mjr
2012-04-12 22:03 ` Ben Hutchings
2012-04-12 20:06 mjr
2012-04-12 20:34 ` Stephen Boyd
2012-04-12 20:56   ` Matt Renzelmann
2012-04-12 20:59   ` Flavio Leitner
2012-04-12 21:19     ` Flavio Leitner
2012-04-12 20:40 ` Flavio Leitner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F886674.7050207@codeaurora.org \
    --to=sboyd@codeaurora$(echo .)org \
    --cc=ben-linux@fluff$(echo .)org \
    --cc=bhutchings@solarflare$(echo .)com \
    --cc=davem@davemloft$(echo .)net \
    --cc=fbl@redhat$(echo .)com \
    --cc=mjr@cs$(echo .)wisc.edu \
    --cc=netdev@vger$(echo .)kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox