From: Gao feng <gaofeng@cn•fujitsu.com>
To: Hannes Frederic Sowa <hannes@stressinduktion•org>
Cc: "yoshfuji@linux-ipv6•org" <yoshfuji@linux-ipv6•org>,
"netdev@vger•kernel.org" <netdev@vger•kernel.org>
Subject: Re: [PATCH net] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size
Date: Tue, 02 Jul 2013 10:46:38 +0800 [thread overview]
Message-ID: <51D23F0E.3030104@cn.fujitsu.com> (raw)
In-Reply-To: <20130701181742.GB8937@order.stressinduktion.org>
On 07/02/2013 02:17 AM, Hannes Frederic Sowa wrote:
> If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
> of this when appending the second frame on a corked socket. This results
> in the following splat:
>
> [37598.993962] ------------[ cut here ]------------
> [37598.994008] kernel BUG at net/core/skbuff.c:2064!
> [37598.994008] invalid opcode: 0000 [#1] SMP
> [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
> +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
> +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
> [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
> +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
> [37598.994008] CPU 0
> [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
> [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
> [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202
> [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
> [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
> [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
> [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
> [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
> [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
> [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
> [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
> [37598.994008] Stack:
> [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
> [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
> [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
> [37598.994008] Call Trace:
> [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
> [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
> [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
> [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
> [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
> [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
> [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
> [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
> [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
> [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
> [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
> [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
> [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
> [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
> [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
> [37598.994008] RSP <ffff88003670da18>
> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]---
>
> While there, also check if path mtu discovery is activated for this
> socket. The logic was adapted from ip6_append_data when first writing
> on the corked socket.
>
> This bug was introduced with commit
> 0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec
> fragment").
>
> Cc: Gao feng <gaofeng@cn•fujitsu.com>
> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6•org>
> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion•org>
> ---
> net/ipv6/ip6_output.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
> index dae1949..7701735 100644
> --- a/net/ipv6/ip6_output.c
> +++ b/net/ipv6/ip6_output.c
> @@ -1097,7 +1097,8 @@ static void ip6_append_data_mtu(int *mtu,
> int *maxfraglen,
> unsigned int fragheaderlen,
> struct sk_buff *skb,
> - struct rt6_info *rt)
> + struct rt6_info *rt,
> + struct ipv6_pinfo *np)
> {
> if (!(rt->dst.flags & DST_XFRM_TUNNEL)) {
> if (skb == NULL) {
> @@ -1109,7 +1110,11 @@ static void ip6_append_data_mtu(int *mtu,
> * this fragment is not first, the headers
> * space is regarded as data space.
> */
> - *mtu = dst_mtu(rt->dst.path);
> + *mtu = (np->pmtudisc == IPV6_PMTUDISC_DO) ?
> + rt->dst.dev->mtu :
> + dst_mtu(rt->dst.path);
> + if (np->frag_size && np->frag_size < *mtu)
> + *mtu = np->frag_size;
No need to pass ipv6_pinfo to ip6_append_data_mtu, the below is enough.
*mtu = min(*mtu, (np->pmtudisc == IPV6_PMTUDISC_DO) ?
rt->dst.dev->mtu :
dst_mtu(rt->dst.path);
This patch looks good go me.
Acked-by: Gao feng <gaofeng@cn•fujitsu.com>
Thanks!
> }
> *maxfraglen = ((*mtu - fragheaderlen) & ~7)
> + fragheaderlen - sizeof(struct frag_hdr);
> @@ -1287,8 +1292,7 @@ alloc_new_skb:
> /* update mtu and maxfraglen if necessary */
> if (skb == NULL || skb_prev == NULL)
> ip6_append_data_mtu(&mtu, &maxfraglen,
> - fragheaderlen, skb, rt);
> -
> + fragheaderlen, skb, rt, np);
> skb_prev = skb;
>
> /*
>
next prev parent reply other threads:[~2013-07-02 2:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 18:17 [PATCH net] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size Hannes Frederic Sowa
2013-07-01 18:23 ` Hannes Frederic Sowa
2013-07-02 2:46 ` Gao feng [this message]
2013-07-02 5:13 ` Hannes Frederic Sowa
2013-07-02 5:18 ` Hannes Frederic Sowa
2013-07-02 5:42 ` Gao feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D23F0E.3030104@cn.fujitsu.com \
--to=gaofeng@cn$(echo .)fujitsu.com \
--cc=hannes@stressinduktion$(echo .)org \
--cc=netdev@vger$(echo .)kernel.org \
--cc=yoshfuji@linux-ipv6$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox