From: "Franklin S Cooper Jr." <fcooper@ti•com>
To: Arnd Bergmann <arnd@arndb•de>
Cc: <m-karicheri2@ti•com>, <netdev@vger•kernel.org>, <w-kwok2@ti•com>,
<davem@davemloft•net>
Subject: Re: Keystone 2 boards boot failure
Date: Tue, 2 Feb 2016 19:19:13 -0600 [thread overview]
Message-ID: <56B15591.7080409@ti.com> (raw)
In-Reply-To: <10700980.gTvMTB9pzv@wuerfel>
On 02/02/2016 05:26 PM, Arnd Bergmann wrote:
> On Tuesday 02 February 2016 16:59:34 Franklin Cooper wrote:
>> On 02/02/2016 03:26 PM, Arnd Bergmann wrote:
>>> On Tuesday 02 February 2016 15:01:33 Franklin S Cooper Jr. wrote:
>>>> Yes. Here is a boot log on the latest master with the below
>>>> three patches reverted.
>>>> http://pastebin.com/W7RWSHpE (Working)
>>>>
>>>> I reverted these three patches. The two latest patches seem
>>>> to be trying to correct/expand upon the last patch on this list.
>>>>
>>>> commit 958d104e3d40eef5148c402887138f6594ff7e1e
>>>> netcp: fix regression in receive processing
>>>>
>>>> commit 9dd2d6c5c9755b160fe0111bcdad9491676feea8
>>>> netcp: add more __le32 annotations
>>>>
>>>> commit 899077791403ff7a2d8cfaa87bd1a82d729463e2
>>>> netcp: try to reduce type confusion in descriptors
>>>>
>>> The middle patch should have no effect on generated code, so I'm ignoring
>>> that for now.
>>>
>>> The next thing to rule out is an endianess bug. I assume you
>>> are running this on with a little-endian kernel, correct? If
>>> you are running big-endian, the base assumption that the driver needs
>>> to swap the data was flawed and that portion needs to be done.
>>>
>>> If you are running little-endian 32-bit, please try the partial
>>> revert below, which just undoes the attempt to make it work with
>>> 64-bit kernels.
>> Keystone 2 devices are little-endian 32-bit devices.
> I meant the kernel you are running on it, not the hardware.
> You should always be able to run both a big-endian kernel and
> a littl-endian kernel on any ARMv7 machine, and a couple of
> platforms use 64-bit physical addresses even on 32-bit machines
> (with the normal 32-bit instruction set).
I'm not sure if Keystone 2 devices support this or if we
have support for this. I'll have to double check.
>
> I wasn't completely sure if there are already keystone-derived
> products with 64-bit CPU cores, but I guess the driver would
> fail really badly on those (with or without the patch).
>
>> This partial revert fixes the boot problem for me.
> Ok.
>
>
> I tried to create a smaller version and stumbled over
> a typo, maybe that's the whole problem. Can you try this one:
>
> diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
> index c61d66d38634..8490804416dd 100644
> --- a/drivers/net/ethernet/ti/netcp_core.c
> +++ b/drivers/net/ethernet/ti/netcp_core.c
> @@ -167,7 +167,7 @@ static void set_pad_info(u32 pad0, u32 pad1, u32 pad2, struct knav_dma_desc *des
> {
> desc->pad[0] = cpu_to_le32(pad0);
> desc->pad[1] = cpu_to_le32(pad1);
> - desc->pad[2] = cpu_to_le32(pad1);
> + desc->pad[2] = cpu_to_le32(pad2);
> }
>
> static void set_org_pkt_info(dma_addr_t buff, u32 buff_len,
>
>
> Arnd
So only making this change on the latest master with no
other changes I see the boot problem again.
next prev parent reply other threads:[~2016-02-03 1:19 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 16:50 Keystone 2 boards boot failure Franklin S Cooper Jr.
2016-02-02 20:41 ` Arnd Bergmann
2016-02-02 21:01 ` Franklin S Cooper Jr.
2016-02-02 21:26 ` Arnd Bergmann
2016-02-02 22:59 ` Franklin Cooper
2016-02-02 23:26 ` Arnd Bergmann
2016-02-03 1:19 ` Franklin S Cooper Jr. [this message]
2016-02-03 14:11 ` Franklin S Cooper Jr.
2016-02-03 14:21 ` Grygorii Strashko
2016-02-03 15:37 ` Franklin S Cooper Jr.
2016-02-03 16:20 ` Arnd Bergmann
2016-02-03 16:31 ` Grygorii Strashko
2016-02-03 16:45 ` Murali Karicheri
2016-02-03 20:40 ` Arnd Bergmann
2016-02-04 12:19 ` Grygorii Strashko
2016-02-04 13:07 ` Arnd Bergmann
2016-02-04 17:32 ` Grygorii Strashko
2016-02-03 16:41 ` Murali Karicheri
2016-02-03 20:41 ` Arnd Bergmann
2016-02-04 16:25 ` Grygorii Strashko
2016-02-05 16:18 ` Arnd Bergmann
2016-02-05 17:11 ` Grygorii Strashko
2016-02-08 13:59 ` Arnd Bergmann
2016-02-03 16:35 ` Arnd Bergmann
2016-02-03 17:08 ` santosh shilimkar
2016-02-03 18:47 ` Murali Karicheri
2016-02-03 20:13 ` santosh shilimkar
2016-02-05 18:55 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B15591.7080409@ti.com \
--to=fcooper@ti$(echo .)com \
--cc=arnd@arndb$(echo .)de \
--cc=davem@davemloft$(echo .)net \
--cc=m-karicheri2@ti$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=w-kwok2@ti$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox