From: Grygorii Strashko <grygorii.strashko@ti•com>
To: Arnd Bergmann <arnd@arndb•de>
Cc: "Franklin S Cooper Jr." <fcooper@ti•com>, <m-karicheri2@ti•com>,
<netdev@vger•kernel.org>, <w-kwok2@ti•com>, <davem@davemloft•net>,
Santosh Shilimkar <ssantosh@kernel•org>
Subject: Re: Keystone 2 boards boot failure
Date: Fri, 5 Feb 2016 19:11:06 +0200 [thread overview]
Message-ID: <56B4D7AA.1000309@ti.com> (raw)
In-Reply-To: <2480415.iC3bxkK7OM@wuerfel>
hi Arnd,
On 02/05/2016 06:18 PM, Arnd Bergmann wrote:
> On Thursday 04 February 2016 18:25:08 Grygorii Strashko wrote:
>>>
>>> I have another version for testing below. That removes the logic that
>>> splits and reassembles the 64-bit values, but leaves the other changes
>>> in place. Can you try this?
>>>
>>
>> Nop. It crashes kernel
>
> Ah. too bad.
>
>> 50.244448] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [ 50.266219] Unable to handle kernel NULL pointer dereference at virtual address 00000001
>> [ 50.274287] pgd = c0003000
>> [ 50.277007] [00000001] *pgd=80000800004003, *pmd=00000000
>> [ 50.282412] Internal error: Oops: a07 [#1] PREEMPT SMP ARM
>> [ 50.287881] Modules linked in:
>> [ 50.290938] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.5.0-rc2-00179-gad2f022-dirty #30
>> [ 50.300214] Hardware name: Keystone
>> [ 50.303693] task: c07476c0 ti: c0742000 task.ti: c0742000
>> [ 50.309082] PC is at _test_and_set_bit+0x4/0x4c
>> [ 50.313607] LR is at __netif_schedule+0x1c/0x60
>> [ 50.318127] pc : [<c028415c>] lr : [<c04294f0>] psr: 20000113
>> [ 50.318127] sp : c0743d68 ip : 00000001 fp : c0743d7c
>> [ 50.329568] r10: c0743e00 r9 : c0744100 r8 : ffff9e75
>> [ 50.334775] r7 : 00000000 r6 : 00000040 r5 : de495b00 r4 : 6d3cdb51
>> [ 50.341282] r3 : 00000001 r2 : c07476c0 r1 : 6d3cdba9 r0 : 00000000
>> [ 50.347790] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
>> [ 50.355077] Control: 30c5387d Table: 1878abc0 DAC: fffffffd
>> [ 50.360803] Process swapper/0 (pid: 0, stack limit = 0xc0742210)
>> [ 50.366790] Stack: (0xc0743d68 to 0xc0744000)
>> [ 50.371137] 3d60: d9a16a00 de495b00 c0743d94 c0743d80 c04295a0 c04294e0
>> [ 50.379291] 3d80: de7a9cc0 de495b00 c0743dbc c0743d98 c037396c c0429570 c0061d34 00000010
>> [ 50.387445] 3da0: de7a9d80 de7a9d80 00000040 0000012c c0743ddc c0743dc0 c0375f58 c0373848
>> [ 50.395599] 3dc0: de7a9d80 c0375f3c 00000040 0000012c c0743e3c c0743de0 c042a0cc c0375f48
>> [ 50.403752] 3de0: c0743e9c c06635f8 c0744b1c c0744b1c c0773c46 1e46b000 c0741000 debac000
>> [ 50.411907] 3e00: c0743e00 c0743e00 c0743e08 c0743e08 de408000 00000000 c074408c c0742000
>> [ 50.420061] 3e20: 00000101 00000003 40000003 c0744080 c0743e9c c0743e40 c0026670 c0429ed8
>> [ 50.428215] 3e40: d8722360 c0744808 00200000 c0744100 ffff9e74 c054088c 0000000a c07779c0
>> [ 50.436369] 3e60: c073d2c8 c0744080 c0743e40 c0742000 c0744808 c073dddc 0000004e 00000000
>> [ 50.444522] 3e80: 00000000 de408000 c0773aa4 c07444fc c0743eb4 c0743ea0 c0026a38 c0026548
>> [ 50.452675] 3ea0: c073dddc 0000004e c0743edc c0743eb8 c0061d34 c00269c4 c0744808 e080400c
>> [ 50.460828] 3ec0: c0743f08 e0804000 e0805000 c0773aa4 c0743f04 c0743ee0 c0009438 c0061cd8
>> [ 50.468981] 3ee0: c0010314 60000013 ffffffff c0743f3c c0773aa4 c0773aa4 c0743f64 c0743f08
>> [ 50.477136] 3f00: c0013a80 c0009404 00000000 deba8348 000070c8 c001f880 c0742000 c07444b0
>> [ 50.485289] 3f20: c073d324 c0743f78 c0773aa4 c0773aa4 c07444fc c0743f64 c0743f68 c0743f58
>> [ 50.493442] 3f40: c0010310 c0010314 60000013 ffffffff c006d624 c006a15c c0743f74 c0743f68
>> [ 50.501595] 3f60: c00598c0 c00102e0 c0743f8c c0743f78 c00599dc c00598a4 00000002 00000000
>> [ 50.509749] 3f80: c0743fa4 c0743f90 c0538468 c00598d8 c0777050 00000000 c0743ff4 c0743fa8
>> [ 50.517902] 3fa0: c06fad60 c05383e4 ffffffff ffffffff 00000000 c06fa6d8 ffffffff 00000000
>> [ 50.526056] 3fc0: 00000000 c0731a30 00000000 c0777294 c0744484 c0731a2c c0748878 80007000
>> [ 50.534210] 3fe0: 412fc0f4 00000000 00000000 c0743ff8 80008090 c06fa964 00000000 00000000
>> [ 50.542357] Backtrace:
>> [ 50.544816] [<c04294d4>] (__netif_schedule) from [<c04295a0>] (netif_wake_subqueue+0x3c/0x44)
>> [ 50.553312] r5:de495b00 r4:d9a16a00
>> [ 50.556909] [<c0429564>] (netif_wake_subqueue) from [<c037396c>] (netcp_process_tx_compl_packets+0x130/0x134)
>> [ 50.566789] r5:de495b00 r4:de7a9cc0
>> [ 50.570381] [<c037383c>] (netcp_process_tx_compl_packets) from [<c0375f58>] (netcp_tx_poll+0x1c/0x4c)
>> [ 50.579570] r7:0000012c r6:00000040 r5:de7a9d80 r4:de7a9d80
>> [ 50.585258] [<c0375f3c>] (netcp_tx_poll) from [<c042a0cc>] (net_rx_action+0x200/0x2f8)
>> [ 50.593148] r7:0000012c r6:00000040 r5:c0375f3c r4:de7a9d80
>> [ 50.598833] [<c0429ecc>] (net_rx_action) from [<c0026670>] (__do_softirq+0x134/0x258)
>> [ 50.606637] r10:c0744080 r9:40000003 r8:00000003 r7:00000101 r6:c0742000 r5:c074408c
>> [ 50.614486] r4:00000000
>> [ 50.617023] [<c002653c>] (__do_softirq) from [<c0026a38>] (irq_exit+0x80/0xb8)
>> [ 50.624221] r10:c07444fc r9:c0773aa4 r8:de408000 r7:00000000 r6:00000000 r5:0000004e
>> [ 50.632069] r4:c073dddc
>> [ 50.634608] [<c00269b8>] (irq_exit) from [<c0061d34>] (__handle_domain_irq+0x68/0xbc)
>> [ 50.642410] r5:0000004e r4:c073dddc
>> [ 50.645996] [<c0061ccc>] (__handle_domain_irq) from [<c0009438>] (gic_handle_irq+0x40/0x78)
>>
>
> This is a different bug now, something is corrupting the skb pointer, probably as a
> result of the patch below (which is a subset of what is now applied compared
> to the last working version):
>
> diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
> index 7e291c04a81a..cda19f2401c1 100644
> --- a/drivers/net/ethernet/ti/netcp_core.c
> +++ b/drivers/net/ethernet/ti/netcp_core.c
> @@ -117,10 +117,18 @@ static void get_pkt_info(dma_addr_t *buff, u32 *buff_len, dma_addr_t *ndesc,
> +
> +static void get_pad_ptr(void **padptr, struct knav_dma_desc *desc)
> +{
> + u64 pad64;
> +
> + pad64 = le32_to_cpu(desc->pad[0]);
> + *padptr = (void *)(uintptr_t)pad64;
> }
>
> static void get_org_pkt_info(dma_addr_t *buff, u32 *buff_len,
>
> @@ -953,11 +966,11 @@ static int netcp_process_tx_compl_packets(struct netcp_intf *netcp,
> unsigned int budget)
> {
> struct knav_dma_desc *desc;
> + void *ptr;
> struct sk_buff *skb;
> unsigned int dma_sz;
> dma_addr_t dma;
> int pkts = 0;
> - u32 tmp;
>
> while (budget--) {
> dma = knav_queue_pop(netcp->tx_compl_q, &dma_sz);
> @@ -970,7 +983,8 @@ static int netcp_process_tx_compl_packets(struct netcp_intf *netcp,
> continue;
> }
>
> - get_pad_info((u32 *)&skb, &tmp, desc);
> + get_pad_ptr(&ptr, desc);
> + skb = ptr;
> netcp_free_tx_desc_chain(netcp, desc, dma_sz);
> if (!skb) {
> dev_err(netcp->ndev_dev, "No skb in Tx desc\n");
> @@ -1173,7 +1189,8 @@ static int netcp_tx_submit_skb(struct netcp_intf *netcp,
> }
>
> set_words(&tmp, 1, &desc->packet_info);
> - set_words((u32 *)&skb, 1, &desc->pad[0]);
> + tmp = (uintptr_t)&skb;
> + set_words(&tmp, 1, &desc->pad[0]);
&skb is virt address and its size is 32bit even when LPAE=y (phys/dma 64 bit)
so this is excess conversion to/from u64 ;)
This is from the first look.
>
> if (tx_pipe->flags & SWITCH_TO_PORT_IN_TAGINFO) {
> tmp = tx_pipe->switch_to_port;
>
>
> I'm sure it's something obvious and stupid in there, but I just can't
> see it and that is very unsatisfying. Do you see where I am going wrong?
> Most of all, I want to know it so I don't make the same mistake again
> when I patch another driver.
>
I'm very sorry, but I'll not be able to test it in the nearest future :(
What I could do now is update your/my patch as i mentioned in [1]
and re-send it at the weekend (with your authorship and my signoff).
Do you agree?
[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95831.html
--
regards,
-grygorii
next prev parent reply other threads:[~2016-02-05 17:11 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 16:50 Keystone 2 boards boot failure Franklin S Cooper Jr.
2016-02-02 20:41 ` Arnd Bergmann
2016-02-02 21:01 ` Franklin S Cooper Jr.
2016-02-02 21:26 ` Arnd Bergmann
2016-02-02 22:59 ` Franklin Cooper
2016-02-02 23:26 ` Arnd Bergmann
2016-02-03 1:19 ` Franklin S Cooper Jr.
2016-02-03 14:11 ` Franklin S Cooper Jr.
2016-02-03 14:21 ` Grygorii Strashko
2016-02-03 15:37 ` Franklin S Cooper Jr.
2016-02-03 16:20 ` Arnd Bergmann
2016-02-03 16:31 ` Grygorii Strashko
2016-02-03 16:45 ` Murali Karicheri
2016-02-03 20:40 ` Arnd Bergmann
2016-02-04 12:19 ` Grygorii Strashko
2016-02-04 13:07 ` Arnd Bergmann
2016-02-04 17:32 ` Grygorii Strashko
2016-02-03 16:41 ` Murali Karicheri
2016-02-03 20:41 ` Arnd Bergmann
2016-02-04 16:25 ` Grygorii Strashko
2016-02-05 16:18 ` Arnd Bergmann
2016-02-05 17:11 ` Grygorii Strashko [this message]
2016-02-08 13:59 ` Arnd Bergmann
2016-02-03 16:35 ` Arnd Bergmann
2016-02-03 17:08 ` santosh shilimkar
2016-02-03 18:47 ` Murali Karicheri
2016-02-03 20:13 ` santosh shilimkar
2016-02-05 18:55 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B4D7AA.1000309@ti.com \
--to=grygorii.strashko@ti$(echo .)com \
--cc=arnd@arndb$(echo .)de \
--cc=davem@davemloft$(echo .)net \
--cc=fcooper@ti$(echo .)com \
--cc=m-karicheri2@ti$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=ssantosh@kernel$(echo .)org \
--cc=w-kwok2@ti$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox