* Re: [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not changing [not found] <NaDlWbh--3-9@tuta.io> @ 2023-07-29 7:50 ` Neftin, Sasha 2023-07-29 8:02 ` Zulkifli, Muhammad Husaini 0 siblings, 1 reply; 3+ messages in thread From: Neftin, Sasha @ 2023-07-29 7:50 UTC (permalink / raw) To: kkiot, Jesse Brandeburg, Anthony L Nguyen, Ruinskiy, Dima, Avivi, Amir, ron.soesan Cc: Netdev, Intel Wired Lan On 7/25/2023 23:38, kkiot@tuta•io wrote: > [1.] One line summary of the problem: igc driver - Ethernet NIC speed > not changing > [2.] Full description of the problem/report: > Trying to change my I225-V's connection speed to 1000 Mbps down from > 2500 Mbps as a workaround to disconnection issues, but changes won't > apply, regardless of using NetworkManager or ethtool. > > NetworkManager displays the changed values, but they don't seem to > actually apply. > > Using ethtool to change the speed to 1000 Mbps (`ethtool -s enp6s0 speed > 1000`) also fails. > The interface gets brought down then up with the same 2500 Mbps speed. I would suspect "link speed" is a consequent problem here. Please, check your setup. Why does disconnection happen again and again? Any problems with the PCIe link? (caused by reset adapter) I recommend you contact the platform's vendor support. > > [3.] Keywords (i.e., modules, networking, kernel): driver, networking, > igc, intel > [4.] Kernel information > [4.1.] Kernel version (from /proc/version): Linux version 6.4.6-arch1-1 > (linux@archlinux) (gcc (GCC) 13.1.1 20230714, GNU ld (GNU Binutils) > 2.40.0) #1 SMP PREEMPT_DYNAMIC Mon, 24 Jul 2023 20:19:38 +0000 > [4.2.] Kernel .config file: Cannot obtain > [5.] Most recent kernel version which did not have the bug: 6.2.9 or > more recent? > [6.] Output of Oops.. message (if applicable) with symbolic information > resolved (see Documentation/admin-guide/bug-hunting.rst) N/A > [7.] A small shell script or example program which triggers the problem > (if possible) > # ethtool -s [INTERFACE] speed 1000 > [8.] Environment > [8.1.] Software (add the output of the ver_linux script here) Cannot obtain > [8.2.] Processor information (from /proc/cpuinfo): > processor : 0 > vendor_id : AuthenticAMD > cpu family : 23 > model : 113 > model name : AMD Ryzen 5 3600 6-Core Processor > stepping : 0 > microcode : 0x8701030 > cpu MHz : 2473.153 > cache size : 512 KB > physical id : 0 > siblings : 12 > core id : 0 > cpu cores : 6 > apicid : 0 > initial apicid : 0 > fpu : yes > fpu_exception : yes > cpuid level : 16 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt > pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid > extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 > sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy > svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs > skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx > cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibpb stibp vmmcall fsgsbase bmi1 > avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt > xsavec xgetbv1 cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero > irperf xsaveerptr rdpru wbnoinvd arat npt lbrv svm_lock nrip_save > tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold > avic v_vmsave_vmload vgif v_spec_ctrl rdpid overflow_recov succor smca > sev sev_es > bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass retbleed > smt_rsb > bogomips : 7188.50 > TLB size : 3072 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 43 bits physical, 48 bits virtual > power management: ts ttp tm hwpstate cpb eff_freq_ro [13] [14] > > (repeats 12x: 12 threads processor) > [8.3.] Module information (from /proc/modules): > igc 188416 0 - Live 0x0000000000000000 > [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) > /proc/ioports > 0000-0000 : PCI Bus 0000:00 > 0000-0000 : dma1 > 0000-0000 : pic1 > 0000-0000 : timer0 > 0000-0000 : timer1 > 0000-0000 : keyboard > 0000-0000 : PNP0800:00 > 0000-0000 : keyboard > 0000-0000 : rtc0 > 0000-0000 : dma page reg > 0000-0000 : pic2 > 0000-0000 : ACPI PM2_CNT_BLK > 0000-0000 : dma2 > 0000-0000 : fpu > 0000-0000 : pnp 00:03 > 0000-0000 : pnp 00:03 > 0000-0000 : PCI Bus 0000:00 > 0000-0000 : PCI Bus 0000:00 > 0000-0000 : serial > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : ACPI PM1a_EVT_BLK > 0000-0000 : ACPI PM1a_CNT_BLK > 0000-0000 : ACPI PM_TMR > 0000-0000 : ACPI GPE0_BLK > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : piix4_smbus > 0000-0000 : pnp 00:04 > 0000-0000 : piix4_smbus > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : pnp 00:04 > 0000-0000 : PCI conf1 > 0000-0000 : PCI Bus 0000:00 > 0000-0000 : PCI Bus 0000:07 > 0000-0000 : PCI Bus 0000:08 > 0000-0000 : PCI Bus 0000:09 > 0000-0000 : 0000:09:00.0 > > /proc/iomem > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : PCI Bus 0000:00 > 00000000-00000000 : System ROM > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : ACPI Non-volatile Storage > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : System RAM > 00000000-00000000 : System RAM > 00000000-00000000 : System RAM > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : MSFT0101:00 > 00000000-00000000 : MSFT0101:00 > 00000000-00000000 : MSFT0101:00 > 00000000-00000000 : MSFT0101:00 > 00000000-00000000 : ACPI Tables > 00000000-00000000 : ACPI Non-volatile Storage > 00000000-00000000 : Reserved > 00000000-00000000 : System RAM > 00000000-00000000 : Reserved > 00000000-00000000 : PCI Bus 0000:00 > 00000000-00000000 : PCI MMCONFIG 0000 [bus 00-7f] > 00000000-00000000 : pnp 00:00 > 00000000-00000000 : PCI Bus 0000:0b > 00000000-00000000 : 0000:0b:00.3 > 00000000-00000000 : xhci-hcd > 00000000-00000000 : 0000:0b:00.1 > 00000000-00000000 : ccp > 00000000-00000000 : 0000:0b:00.4 > 00000000-00000000 : ICH HD audio > 00000000-00000000 : 0000:0b:00.1 > 00000000-00000000 : ccp > 00000000-00000000 : PCI Bus 0000:07 > 00000000-00000000 : PCI Bus 0000:08 > 00000000-00000000 : PCI Bus 0000:09 > 00000000-00000000 : 0000:09:00.0 > 00000000-00000000 : 0000:09:00.0 > 00000000-00000000 : 0000:09:00.1 > 00000000-00000000 : ICH HD audio > 00000000-00000000 : 0000:07:00.0 > 00000000-00000000 : PCI Bus 0000:02 > 00000000-00000000 : PCI Bus 0000:03 > 00000000-00000000 : PCI Bus 0000:06 > 00000000-00000000 : 0000:06:00.0 > 00000000-00000000 : igc > 00000000-00000000 : 0000:06:00.0 > 00000000-00000000 : igc > 00000000-00000000 : 0000:02:00.1 > 00000000-00000000 : 0000:02:00.1 > 00000000-00000000 : ahci > 00000000-00000000 : 0000:02:00.0 > 00000000-00000000 : xhci-hcd > 00000000-00000000 : PCI Bus 0000:01 > 00000000-00000000 : 0000:01:00.0 > 00000000-00000000 : nvme > 00000000-00000000 : pnp 00:01 > 00000000-00000000 : MSFT0101:00 > 00000000-00000000 : amd_iommu > 00000000-00000000 : Reserved > 00000000-00000000 : IOAPIC 0 > 00000000-00000000 : IOAPIC 1 > 00000000-00000000 : Reserved > 00000000-00000000 : pnp 00:04 > 00000000-00000000 : Reserved > 00000000-00000000 : AMDIF030:00 > 00000000-00000000 : AMDIF030:00 AMDIF030:00 > 00000000-00000000 : Reserved > 00000000-00000000 : HPET 0 > 00000000-00000000 : PNP0103:00 > 00000000-00000000 : Reserved > 00000000-00000000 : Reserved > 00000000-00000000 : AMDI0030:00 > 00000000-00000000 : AMDI0030:00 AMDI0030:00 > 00000000-00000000 : pnp 00:04 > 00000000-00000000 : Reserved > 00000000-00000000 : AMDI0010:03 > 00000000-00000000 : AMDI0010:03 AMDI0010:03 > 00000000-00000000 : Reserved > 00000000-00000000 : Local APIC > 00000000-00000000 : pnp 00:04 > 00000000-00000000 : pnp 00:04 > 00000000-00000000 : System RAM > 00000000-00000000 : Kernel code > 00000000-00000000 : Kernel rodata > 00000000-00000000 : Kernel data > 00000000-00000000 : Kernel bss > 00000000-00000000 : Reserved > 00000000-00000000 : PCI Bus 0000:00 > 00000000-00000000 : PCI Bus 0000:07 > 00000000-00000000 : PCI Bus 0000:08 > 00000000-00000000 : PCI Bus 0000:09 > 00000000-00000000 : 0000:09:00.0 > 00000000-00000000 : 0000:09:00.0 > 00000000-00000000 : 0000:09:00.0 > [8.5.] PCI information ('lspci -vvv' as root) > 06:00.0 Ethernet controller: Intel Corporation Ethernet Controller > I225-V (rev 02) > Subsystem: ASUSTeK Computer Inc. Ethernet Controller I225-V > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 36 > IOMMU group: 15 > Region 0: Memory at fcc00000 (32-bit, non-prefetchable) [size=1M] > Region 3: Memory at fcd00000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [70] MSI-X: Enable+ Count=5 Masked- > Vector table: BAR=3 offset=00000000 > PBA: BAR=3 offset=00002000 > Capabilities: [a0] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W > DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- > MaxPayload 512 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- > LnkCap: Port #9, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <4us > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 5GT/s, Width x1 > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ > 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- > EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- > FRS- TPHComp- ExtTPHComp- > AtomicOpsCap: 32bit- 64bit- 128bitCAS- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- > OBFF Disabled, > AtomicOpsCtl: ReqEn- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- > ComplianceSOS- > Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- > EqualizationPhase1- > EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- > Retimer- 2Retimers- CrosslinkRes: unsupported > Capabilities: [100 v2] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- > ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- > ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ > AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ > ECRCChkEn- > MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- > HeaderLog: 00000000 00000000 00000000 00000000 > Capabilities: [140 v1] Device Serial Number 24-4b-fe-ff-ff-5a-40-86 > Capabilities: [1c0 v1] Latency Tolerance Reporting > Max snoop latency: 0ns > Max no snoop latency: 0ns > Capabilities: [1f0 v1] Precision Time Measurement > PTMCap: Requester:+ Responder:- Root:- > PTMClockGranularity: 4ns > PTMControl: Enabled:+ RootSelected:- > PTMEffectiveGranularity: Unknown > Capabilities: [1e0 v1] L1 PM Substates > L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ L1_PM_Substates+ > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- > L1SubCtl2: > Kernel driver in use: igc > Kernel modules: igc > [8.6.] SCSI information (from /proc/scsi/scsi) Empty > [8.7.] Other information that might be relevant to the problem (please > look in /proc and include all information that you think to be relevant): > Relevant logs after running `ethtool -s enp6s0 speed 1000`: > > juil. 25 21:14:56 kkiotarch NetworkManager[459]: <info> > [1690312496.0963] device (enp6s0): carrier: link connected > juil. 25 21:14:56 kkiotarch kernel: igc 0000:06:00.0 enp6s0: NIC Link is > Up 2500 Mbps Full Duplex, Flow Control: RX/TX > > [X.] Other notes, patches, fixes, workarounds: > As a temporary solution, I have forced port speed to be set at 1000 Mbps > via my router. rather auto negotiated to 1G (force speed is n/a for 1G/2.5G). This won't resolve disconnetions. > > Apologies if this should have submitted to my distribution's bug report > first (Arch Linux); on my current kernel version, there should be no > patches applied here compared to upstream. > > Thank you, > KKIOT > > _______________________________________________ > Intel-wired-lan mailing list > Intel-wired-lan@osuosl•org > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan ^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not changing 2023-07-29 7:50 ` [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not changing Neftin, Sasha @ 2023-07-29 8:02 ` Zulkifli, Muhammad Husaini 2023-07-29 17:39 ` kkiot 0 siblings, 1 reply; 3+ messages in thread From: Zulkifli, Muhammad Husaini @ 2023-07-29 8:02 UTC (permalink / raw) To: Neftin, Sasha, kkiot@tuta•io, Brandeburg, Jesse, Nguyen, Anthony L, Ruinskiy, Dima, Avivi, Amir, Soesan, Ron Cc: Netdev, Intel Wired Lan Hello, > -----Original Message----- > From: Intel-wired-lan <intel-wired-lan-bounces@osuosl•org> On Behalf Of > Neftin, Sasha > Sent: Saturday, 29 July, 2023 3:51 PM > To: kkiot@tuta•io; Brandeburg, Jesse <jesse.brandeburg@intel•com>; > Nguyen, Anthony L <anthony.l.nguyen@intel•com>; Ruinskiy, Dima > <dima.ruinskiy@intel•com>; Avivi, Amir <amir.avivi@intel•com>; Soesan, Ron > <ron.soesan@intel•com> > Cc: Netdev <netdev@vger•kernel.org>; Intel Wired Lan <intel-wired- > lan@lists•osuosl.org> > Subject: Re: [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not > changing > > On 7/25/2023 23:38, kkiot@tuta•io wrote: > > [1.] One line summary of the problem: igc driver - Ethernet NIC speed > > not changing [2.] Full description of the problem/report: > > Trying to change my I225-V's connection speed to 1000 Mbps down from > > 2500 Mbps as a workaround to disconnection issues, but changes won't > > apply, regardless of using NetworkManager or ethtool. > > > > NetworkManager displays the changed values, but they don't seem to > > actually apply. > > > > Using ethtool to change the speed to 1000 Mbps (`ethtool -s enp6s0 > > speed > > 1000`) also fails. > > The interface gets brought down then up with the same 2500 Mbps speed. > > I would suspect "link speed" is a consequent problem here. Please, check > your setup. Why does disconnection happen again and again? Any problems > with the PCIe link? (caused by reset adapter) I recommend you contact the > platform's vendor support. IMHO, we shall use the advertise command instead of speed command since we are using legacy advertise setting. Could you try with below command and see if the link activity happen accordingly? Ex: ethtool -s <interface> advertise <value> <value> - : 2 (10Mbps) : 8 (100Mbps) : 32 (1000Mbps) > > [3.] Keywords (i.e., modules, networking, kernel): driver, networking, > > igc, intel [4.] Kernel information [4.1.] Kernel version (from > > /proc/version): Linux version 6.4.6-arch1-1 > > (linux@archlinux) (gcc (GCC) 13.1.1 20230714, GNU ld (GNU Binutils) > > 2.40.0) #1 SMP PREEMPT_DYNAMIC Mon, 24 Jul 2023 20:19:38 +0000 [4.2.] > > Kernel .config file: Cannot obtain [5.] Most recent kernel version > > which did not have the bug: 6.2.9 or more recent? > > [6.] Output of Oops.. message (if applicable) with symbolic > > information resolved (see Documentation/admin-guide/bug-hunting.rst) > > N/A [7.] A small shell script or example program which triggers the > > problem (if possible) # ethtool -s [INTERFACE] speed 1000 [8.] > > Environment [8.1.] Software (add the output of the ver_linux script > > here) Cannot obtain [8.2.] Processor information (from /proc/cpuinfo): > > processor : 0 > > vendor_id : AuthenticAMD > > cpu family : 23 > > model : 113 > > model name : AMD Ryzen 5 3600 6-Core Processor stepping : 0 microcode > > : 0x8701030 cpu MHz : 2473.153 cache size : 512 KB physical id : 0 > > siblings : 12 core id : 0 cpu cores : 6 apicid : 0 initial apicid : 0 > > fpu : yes fpu_exception : yes cpuid level : 16 wp : yes flags : fpu > > vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 > > clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp > > lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf > > rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 > > sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm > > cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch > > osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext > > perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibpb stibp > > vmmcall fsgsbase bmi1 > > avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni > > xsaveopt xsavec xgetbv1 cqm_llc cqm_occup_llc cqm_mbm_total > > cqm_mbm_local clzero irperf xsaveerptr rdpru wbnoinvd arat npt lbrv > > svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists > > pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl rdpid > > overflow_recov succor smca sev sev_es bugs : sysret_ss_attrs > > spectre_v1 spectre_v2 spec_store_bypass retbleed smt_rsb bogomips : > > 7188.50 TLB size : 3072 4K pages clflush size : 64 cache_alignment : > > 64 address sizes : 43 bits physical, 48 bits virtual power management: > > ts ttp tm hwpstate cpb eff_freq_ro [13] [14] > > > > (repeats 12x: 12 threads processor) > > [8.3.] Module information (from /proc/modules): > > igc 188416 0 - Live 0x0000000000000000 [8.4.] Loaded driver and > > hardware information (/proc/ioports, /proc/iomem) /proc/ioports > > 0000-0000 : PCI Bus 0000:00 > > 0000-0000 : dma1 > > 0000-0000 : pic1 > > 0000-0000 : timer0 > > 0000-0000 : timer1 > > 0000-0000 : keyboard > > 0000-0000 : PNP0800:00 > > 0000-0000 : keyboard > > 0000-0000 : rtc0 > > 0000-0000 : dma page reg > > 0000-0000 : pic2 > > 0000-0000 : ACPI PM2_CNT_BLK > > 0000-0000 : dma2 > > 0000-0000 : fpu > > 0000-0000 : pnp 00:03 > > 0000-0000 : pnp 00:03 > > 0000-0000 : PCI Bus 0000:00 > > 0000-0000 : PCI Bus 0000:00 > > 0000-0000 : serial > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : ACPI PM1a_EVT_BLK > > 0000-0000 : ACPI PM1a_CNT_BLK > > 0000-0000 : ACPI PM_TMR > > 0000-0000 : ACPI GPE0_BLK > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : piix4_smbus > > 0000-0000 : pnp 00:04 > > 0000-0000 : piix4_smbus > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : pnp 00:04 > > 0000-0000 : PCI conf1 > > 0000-0000 : PCI Bus 0000:00 > > 0000-0000 : PCI Bus 0000:07 > > 0000-0000 : PCI Bus 0000:08 > > 0000-0000 : PCI Bus 0000:09 > > 0000-0000 : 0000:09:00.0 > > > > /proc/iomem > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : PCI Bus 0000:00 > > 00000000-00000000 : System ROM > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : ACPI Non-volatile Storage > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : System RAM > > 00000000-00000000 : System RAM > > 00000000-00000000 : System RAM > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : MSFT0101:00 > > 00000000-00000000 : MSFT0101:00 > > 00000000-00000000 : MSFT0101:00 > > 00000000-00000000 : MSFT0101:00 > > 00000000-00000000 : ACPI Tables > > 00000000-00000000 : ACPI Non-volatile Storage > > 00000000-00000000 : Reserved > > 00000000-00000000 : System RAM > > 00000000-00000000 : Reserved > > 00000000-00000000 : PCI Bus 0000:00 > > 00000000-00000000 : PCI MMCONFIG 0000 [bus 00-7f] > > 00000000-00000000 : pnp 00:00 > > 00000000-00000000 : PCI Bus 0000:0b > > 00000000-00000000 : 0000:0b:00.3 > > 00000000-00000000 : xhci-hcd > > 00000000-00000000 : 0000:0b:00.1 > > 00000000-00000000 : ccp > > 00000000-00000000 : 0000:0b:00.4 > > 00000000-00000000 : ICH HD audio > > 00000000-00000000 : 0000:0b:00.1 > > 00000000-00000000 : ccp > > 00000000-00000000 : PCI Bus 0000:07 > > 00000000-00000000 : PCI Bus 0000:08 > > 00000000-00000000 : PCI Bus 0000:09 > > 00000000-00000000 : 0000:09:00.0 > > 00000000-00000000 : 0000:09:00.0 > > 00000000-00000000 : 0000:09:00.1 > > 00000000-00000000 : ICH HD audio > > 00000000-00000000 : 0000:07:00.0 > > 00000000-00000000 : PCI Bus 0000:02 > > 00000000-00000000 : PCI Bus 0000:03 > > 00000000-00000000 : PCI Bus 0000:06 > > 00000000-00000000 : 0000:06:00.0 > > 00000000-00000000 : igc > > 00000000-00000000 : 0000:06:00.0 > > 00000000-00000000 : igc > > 00000000-00000000 : 0000:02:00.1 > > 00000000-00000000 : 0000:02:00.1 > > 00000000-00000000 : ahci > > 00000000-00000000 : 0000:02:00.0 > > 00000000-00000000 : xhci-hcd > > 00000000-00000000 : PCI Bus 0000:01 > > 00000000-00000000 : 0000:01:00.0 > > 00000000-00000000 : nvme > > 00000000-00000000 : pnp 00:01 > > 00000000-00000000 : MSFT0101:00 > > 00000000-00000000 : amd_iommu > > 00000000-00000000 : Reserved > > 00000000-00000000 : IOAPIC 0 > > 00000000-00000000 : IOAPIC 1 > > 00000000-00000000 : Reserved > > 00000000-00000000 : pnp 00:04 > > 00000000-00000000 : Reserved > > 00000000-00000000 : AMDIF030:00 > > 00000000-00000000 : AMDIF030:00 AMDIF030:00 > > 00000000-00000000 : Reserved > > 00000000-00000000 : HPET 0 > > 00000000-00000000 : PNP0103:00 > > 00000000-00000000 : Reserved > > 00000000-00000000 : Reserved > > 00000000-00000000 : AMDI0030:00 > > 00000000-00000000 : AMDI0030:00 AMDI0030:00 > > 00000000-00000000 : pnp 00:04 > > 00000000-00000000 : Reserved > > 00000000-00000000 : AMDI0010:03 > > 00000000-00000000 : AMDI0010:03 AMDI0010:03 > > 00000000-00000000 : Reserved > > 00000000-00000000 : Local APIC > > 00000000-00000000 : pnp 00:04 > > 00000000-00000000 : pnp 00:04 > > 00000000-00000000 : System RAM > > 00000000-00000000 : Kernel code > > 00000000-00000000 : Kernel rodata > > 00000000-00000000 : Kernel data > > 00000000-00000000 : Kernel bss > > 00000000-00000000 : Reserved > > 00000000-00000000 : PCI Bus 0000:00 > > 00000000-00000000 : PCI Bus 0000:07 > > 00000000-00000000 : PCI Bus 0000:08 > > 00000000-00000000 : PCI Bus 0000:09 > > 00000000-00000000 : 0000:09:00.0 > > 00000000-00000000 : 0000:09:00.0 > > 00000000-00000000 : 0000:09:00.0 > > [8.5.] PCI information ('lspci -vvv' as root) > > 06:00.0 Ethernet controller: Intel Corporation Ethernet Controller > > I225-V (rev 02) > > Subsystem: ASUSTeK Computer Inc. Ethernet Controller I225-V > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- > > Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > > <TAbort- > > <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 36 > > IOMMU group: 15 > > Region 0: Memory at fcc00000 (32-bit, non-prefetchable) [size=1M] > > Region 3: Memory at fcd00000 (32-bit, non-prefetchable) [size=16K] > > Capabilities: [40] Power Management version 3 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > > PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > > Address: 0000000000000000 Data: 0000 > > Masking: 00000000 Pending: 00000000 > > Capabilities: [70] MSI-X: Enable+ Count=5 Masked- Vector table: BAR=3 > > offset=00000000 > > PBA: BAR=3 offset=00002000 > > Capabilities: [a0] Express (v2) Endpoint, MSI 00 > > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 > > <64us > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W > > DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- > > MaxPayload 512 bytes, MaxReadReq 512 bytes > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- > > LnkCap: Port #9, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <4us > > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ > > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 5GT/s, Width x1 > > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ > > 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- > > EmergencyPowerReduction Not Supported, > EmergencyPowerReductionInit- > > FRS- TPHComp- ExtTPHComp- > > AtomicOpsCap: 32bit- 64bit- 128bitCAS- > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- > > 10BitTagReq- OBFF Disabled, > > AtomicOpsCtl: ReqEn- > > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit > > Margin: Normal Operating Range, EnterModifiedCompliance- > > ComplianceSOS- > > Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot > > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- > > EqualizationPhase1- > > EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- > > Retimer- 2Retimers- CrosslinkRes: unsupported > > Capabilities: [100 v2] Advanced Error Reporting > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > > MalfTLP- > > ECRC- UnsupReq- ACSViol- > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > > MalfTLP- > > ECRC- UnsupReq- ACSViol- > > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > > MalfTLP+ ECRC- UnsupReq- ACSViol- > > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ > > AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ > > ECRCChkEn- > > MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- > > HeaderLog: 00000000 00000000 00000000 00000000 > > Capabilities: [140 v1] Device Serial Number 24-4b-fe-ff-ff-5a-40-86 > > Capabilities: [1c0 v1] Latency Tolerance Reporting Max snoop latency: > > 0ns Max no snoop latency: 0ns > > Capabilities: [1f0 v1] Precision Time Measurement > > PTMCap: Requester:+ Responder:- Root:- > > PTMClockGranularity: 4ns > > PTMControl: Enabled:+ RootSelected:- > > PTMEffectiveGranularity: Unknown > > Capabilities: [1e0 v1] L1 PM Substates > > L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ > > L1_PM_Substates+ > > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- > > L1SubCtl2: > > Kernel driver in use: igc > > Kernel modules: igc > > [8.6.] SCSI information (from /proc/scsi/scsi) Empty [8.7.] Other > > information that might be relevant to the problem (please look in > > /proc and include all information that you think to be relevant): > > Relevant logs after running `ethtool -s enp6s0 speed 1000`: > > > > juil. 25 21:14:56 kkiotarch NetworkManager[459]: <info> > > [1690312496.0963] device (enp6s0): carrier: link connected juil. 25 > > 21:14:56 kkiotarch kernel: igc 0000:06:00.0 enp6s0: NIC Link is Up > > 2500 Mbps Full Duplex, Flow Control: RX/TX > > > > [X.] Other notes, patches, fixes, workarounds: > > As a temporary solution, I have forced port speed to be set at 1000 > > Mbps via my router. > > rather auto negotiated to 1G (force speed is n/a for 1G/2.5G). This won't > resolve disconnetions. > > > > > Apologies if this should have submitted to my distribution's bug > > report first (Arch Linux); on my current kernel version, there should > > be no patches applied here compared to upstream. > > > > Thank you, > > KKIOT > > > > _______________________________________________ > > Intel-wired-lan mailing list > > Intel-wired-lan@osuosl•org > > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan > > _______________________________________________ > Intel-wired-lan mailing list > Intel-wired-lan@osuosl•org > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan ^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not changing 2023-07-29 8:02 ` Zulkifli, Muhammad Husaini @ 2023-07-29 17:39 ` kkiot 0 siblings, 0 replies; 3+ messages in thread From: kkiot @ 2023-07-29 17:39 UTC (permalink / raw) To: Zulkifli, Muhammad Husaini Cc: Neftin, Sasha, Brandeburg, Jesse, Nguyen, Anthony L, Ruinskiy, Dima, Avivi, Amir, Soesan, Ron, Netdev, Intel Wired Lan 29 juil. 2023, 08:02 de muhammad.husaini.zulkifli@intel•com: > Hello, > >> -----Original Message----- >> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl•org> On Behalf Of >> Neftin, Sasha >> Sent: Saturday, 29 July, 2023 3:51 PM >> To: kkiot@tuta•io; Brandeburg, Jesse <jesse.brandeburg@intel•com>; >> Nguyen, Anthony L <anthony.l.nguyen@intel•com>; Ruinskiy, Dima >> <dima.ruinskiy@intel•com>; Avivi, Amir <amir.avivi@intel•com>; Soesan, Ron >> <ron.soesan@intel•com> >> Cc: Netdev <netdev@vger•kernel.org>; Intel Wired Lan <intel-wired- >> lan@lists•osuosl.org> >> Subject: Re: [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not >> changing >> >> On 7/25/2023 23:38, kkiot@tuta•io wrote: >> > [1.] One line summary of the problem: igc driver - Ethernet NIC speed >> > not changing [2.] Full description of the problem/report: >> > Trying to change my I225-V's connection speed to 1000 Mbps down from >> > 2500 Mbps as a workaround to disconnection issues, but changes won't >> > apply, regardless of using NetworkManager or ethtool. >> > >> > NetworkManager displays the changed values, but they don't seem to >> > actually apply. >> > >> > Using ethtool to change the speed to 1000 Mbps (`ethtool -s enp6s0 >> > speed >> > 1000`) also fails. >> > The interface gets brought down then up with the same 2500 Mbps speed. >> >> I would suspect "link speed" is a consequent problem here. Please, check >> your setup. Why does disconnection happen again and again? Any problems >> with the PCIe link? (caused by reset adapter) I recommend you contact the >> platform's vendor support. >> This is a known problem with some earlier versions of I225-V and it happens outside of Linux and the igc driver. It has been solved by newer revisions so I think we should not stress over that. The best I can do is get a replacement. > > IMHO, we shall use the advertise command instead of speed command > since we are using legacy advertise setting. > Could you try with below command and see if the link activity happen > accordingly? > > Ex: > > ethtool -s <interface> advertise <value> > > <value> - : 2 (10Mbps) > : 8 (100Mbps) > : 32 (1000Mbps) > Hi, I ran the command `ethtool -s enp6s0 advertise 0x020` which corresponds to "1000baseT Full", and it indeed works just fine. Interface quickly adopts the 1 Gbps speed. This seems to be a better command to use than "ethtool -s speed". Thanks! >> > [3.] Keywords (i.e., modules, networking, kernel): driver, networking, >> > igc, intel [4.] Kernel information [4.1.] Kernel version (from >> > /proc/version): Linux version 6.4.6-arch1-1 >> > (linux@archlinux) (gcc (GCC) 13.1.1 20230714, GNU ld (GNU Binutils) >> > 2.40.0) #1 SMP PREEMPT_DYNAMIC Mon, 24 Jul 2023 20:19:38 +0000 [4.2.] >> > Kernel .config file: Cannot obtain [5.] Most recent kernel version >> > which did not have the bug: 6.2.9 or more recent? >> > [6.] Output of Oops.. message (if applicable) with symbolic >> > information resolved (see Documentation/admin-guide/bug-hunting.rst) >> > N/A [7.] A small shell script or example program which triggers the >> > problem (if possible) # ethtool -s [INTERFACE] speed 1000 [8.] >> > Environment [8.1.] Software (add the output of the ver_linux script >> > here) Cannot obtain [8.2.] Processor information (from /proc/cpuinfo): >> > processor : 0 >> > vendor_id : AuthenticAMD >> > cpu family : 23 >> > model : 113 >> > model name : AMD Ryzen 5 3600 6-Core Processor stepping : 0 microcode >> > : 0x8701030 cpu MHz : 2473.153 cache size : 512 KB physical id : 0 >> > siblings : 12 core id : 0 cpu cores : 6 apicid : 0 initial apicid : 0 >> > fpu : yes fpu_exception : yes cpuid level : 16 wp : yes flags : fpu >> > vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 >> > clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp >> > lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf >> > rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 >> > sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm >> > cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch >> > osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext >> > perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibpb stibp >> > vmmcall fsgsbase bmi1 >> > avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni >> > xsaveopt xsavec xgetbv1 cqm_llc cqm_occup_llc cqm_mbm_total >> > cqm_mbm_local clzero irperf xsaveerptr rdpru wbnoinvd arat npt lbrv >> > svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists >> > pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl rdpid >> > overflow_recov succor smca sev sev_es bugs : sysret_ss_attrs >> > spectre_v1 spectre_v2 spec_store_bypass retbleed smt_rsb bogomips : >> > 7188.50 TLB size : 3072 4K pages clflush size : 64 cache_alignment : >> > 64 address sizes : 43 bits physical, 48 bits virtual power management: >> > ts ttp tm hwpstate cpb eff_freq_ro [13] [14] >> > >> > (repeats 12x: 12 threads processor) >> > [8.3.] Module information (from /proc/modules): >> > igc 188416 0 - Live 0x0000000000000000 [8.4.] Loaded driver and >> > hardware information (/proc/ioports, /proc/iomem) /proc/ioports >> > 0000-0000 : PCI Bus 0000:00 >> > 0000-0000 : dma1 >> > 0000-0000 : pic1 >> > 0000-0000 : timer0 >> > 0000-0000 : timer1 >> > 0000-0000 : keyboard >> > 0000-0000 : PNP0800:00 >> > 0000-0000 : keyboard >> > 0000-0000 : rtc0 >> > 0000-0000 : dma page reg >> > 0000-0000 : pic2 >> > 0000-0000 : ACPI PM2_CNT_BLK >> > 0000-0000 : dma2 >> > 0000-0000 : fpu >> > 0000-0000 : pnp 00:03 >> > 0000-0000 : pnp 00:03 >> > 0000-0000 : PCI Bus 0000:00 >> > 0000-0000 : PCI Bus 0000:00 >> > 0000-0000 : serial >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : ACPI PM1a_EVT_BLK >> > 0000-0000 : ACPI PM1a_CNT_BLK >> > 0000-0000 : ACPI PM_TMR >> > 0000-0000 : ACPI GPE0_BLK >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : piix4_smbus >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : piix4_smbus >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : pnp 00:04 >> > 0000-0000 : PCI conf1 >> > 0000-0000 : PCI Bus 0000:00 >> > 0000-0000 : PCI Bus 0000:07 >> > 0000-0000 : PCI Bus 0000:08 >> > 0000-0000 : PCI Bus 0000:09 >> > 0000-0000 : 0000:09:00.0 >> > >> > /proc/iomem >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : PCI Bus 0000:00 >> > 00000000-00000000 : System ROM >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : ACPI Non-volatile Storage >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : MSFT0101:00 >> > 00000000-00000000 : MSFT0101:00 >> > 00000000-00000000 : MSFT0101:00 >> > 00000000-00000000 : MSFT0101:00 >> > 00000000-00000000 : ACPI Tables >> > 00000000-00000000 : ACPI Non-volatile Storage >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : PCI Bus 0000:00 >> > 00000000-00000000 : PCI MMCONFIG 0000 [bus 00-7f] >> > 00000000-00000000 : pnp 00:00 >> > 00000000-00000000 : PCI Bus 0000:0b >> > 00000000-00000000 : 0000:0b:00.3 >> > 00000000-00000000 : xhci-hcd >> > 00000000-00000000 : 0000:0b:00.1 >> > 00000000-00000000 : ccp >> > 00000000-00000000 : 0000:0b:00.4 >> > 00000000-00000000 : ICH HD audio >> > 00000000-00000000 : 0000:0b:00.1 >> > 00000000-00000000 : ccp >> > 00000000-00000000 : PCI Bus 0000:07 >> > 00000000-00000000 : PCI Bus 0000:08 >> > 00000000-00000000 : PCI Bus 0000:09 >> > 00000000-00000000 : 0000:09:00.0 >> > 00000000-00000000 : 0000:09:00.0 >> > 00000000-00000000 : 0000:09:00.1 >> > 00000000-00000000 : ICH HD audio >> > 00000000-00000000 : 0000:07:00.0 >> > 00000000-00000000 : PCI Bus 0000:02 >> > 00000000-00000000 : PCI Bus 0000:03 >> > 00000000-00000000 : PCI Bus 0000:06 >> > 00000000-00000000 : 0000:06:00.0 >> > 00000000-00000000 : igc >> > 00000000-00000000 : 0000:06:00.0 >> > 00000000-00000000 : igc >> > 00000000-00000000 : 0000:02:00.1 >> > 00000000-00000000 : 0000:02:00.1 >> > 00000000-00000000 : ahci >> > 00000000-00000000 : 0000:02:00.0 >> > 00000000-00000000 : xhci-hcd >> > 00000000-00000000 : PCI Bus 0000:01 >> > 00000000-00000000 : 0000:01:00.0 >> > 00000000-00000000 : nvme >> > 00000000-00000000 : pnp 00:01 >> > 00000000-00000000 : MSFT0101:00 >> > 00000000-00000000 : amd_iommu >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : IOAPIC 0 >> > 00000000-00000000 : IOAPIC 1 >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : pnp 00:04 >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : AMDIF030:00 >> > 00000000-00000000 : AMDIF030:00 AMDIF030:00 >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : HPET 0 >> > 00000000-00000000 : PNP0103:00 >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : AMDI0030:00 >> > 00000000-00000000 : AMDI0030:00 AMDI0030:00 >> > 00000000-00000000 : pnp 00:04 >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : AMDI0010:03 >> > 00000000-00000000 : AMDI0010:03 AMDI0010:03 >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : Local APIC >> > 00000000-00000000 : pnp 00:04 >> > 00000000-00000000 : pnp 00:04 >> > 00000000-00000000 : System RAM >> > 00000000-00000000 : Kernel code >> > 00000000-00000000 : Kernel rodata >> > 00000000-00000000 : Kernel data >> > 00000000-00000000 : Kernel bss >> > 00000000-00000000 : Reserved >> > 00000000-00000000 : PCI Bus 0000:00 >> > 00000000-00000000 : PCI Bus 0000:07 >> > 00000000-00000000 : PCI Bus 0000:08 >> > 00000000-00000000 : PCI Bus 0000:09 >> > 00000000-00000000 : 0000:09:00.0 >> > 00000000-00000000 : 0000:09:00.0 >> > 00000000-00000000 : 0000:09:00.0 >> > [8.5.] PCI information ('lspci -vvv' as root) >> > 06:00.0 Ethernet controller: Intel Corporation Ethernet Controller >> > I225-V (rev 02) >> > Subsystem: ASUSTeK Computer Inc. Ethernet Controller I225-V >> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- >> > Stepping- SERR- FastB2B- DisINTx+ >> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> > <TAbort- >> > <MAbort- >SERR- <PERR- INTx- >> > Latency: 0, Cache Line Size: 64 bytes >> > Interrupt: pin A routed to IRQ 36 >> > IOMMU group: 15 >> > Region 0: Memory at fcc00000 (32-bit, non-prefetchable) [size=1M] >> > Region 3: Memory at fcd00000 (32-bit, non-prefetchable) [size=16K] >> > Capabilities: [40] Power Management version 3 >> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >> > PME(D0+,D1-,D2-,D3hot+,D3cold+) >> > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- >> > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ >> > Address: 0000000000000000 Data: 0000 >> > Masking: 00000000 Pending: 00000000 >> > Capabilities: [70] MSI-X: Enable+ Count=5 Masked- Vector table: BAR=3 >> > offset=00000000 >> > PBA: BAR=3 offset=00002000 >> > Capabilities: [a0] Express (v2) Endpoint, MSI 00 >> > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 >> > <64us >> > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W >> > DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ >> > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- >> > MaxPayload 512 bytes, MaxReadReq 512 bytes >> > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- >> > LnkCap: Port #9, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <4us >> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ >> > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ >> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> > LnkSta: Speed 5GT/s, Width x1 >> > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- >> > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ >> > 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- >> > EmergencyPowerReduction Not Supported, >> EmergencyPowerReductionInit- >> > FRS- TPHComp- ExtTPHComp- >> > AtomicOpsCap: 32bit- 64bit- 128bitCAS- >> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- >> > 10BitTagReq- OBFF Disabled, >> > AtomicOpsCtl: ReqEn- >> > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit >> > Margin: Normal Operating Range, EnterModifiedCompliance- >> > ComplianceSOS- >> > Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot >> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- >> > EqualizationPhase1- >> > EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- >> > Retimer- 2Retimers- CrosslinkRes: unsupported >> > Capabilities: [100 v2] Advanced Error Reporting >> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> > MalfTLP- >> > ECRC- UnsupReq- ACSViol- >> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> > MalfTLP- >> > ECRC- UnsupReq- ACSViol- >> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ >> > MalfTLP+ ECRC- UnsupReq- ACSViol- >> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- >> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ >> > AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ >> > ECRCChkEn- >> > MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- >> > HeaderLog: 00000000 00000000 00000000 00000000 >> > Capabilities: [140 v1] Device Serial Number 24-4b-fe-ff-ff-5a-40-86 >> > Capabilities: [1c0 v1] Latency Tolerance Reporting Max snoop latency: >> > 0ns Max no snoop latency: 0ns >> > Capabilities: [1f0 v1] Precision Time Measurement >> > PTMCap: Requester:+ Responder:- Root:- >> > PTMClockGranularity: 4ns >> > PTMControl: Enabled:+ RootSelected:- >> > PTMEffectiveGranularity: Unknown >> > Capabilities: [1e0 v1] L1 PM Substates >> > L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ >> > L1_PM_Substates+ >> > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- >> > L1SubCtl2: >> > Kernel driver in use: igc >> > Kernel modules: igc >> > [8.6.] SCSI information (from /proc/scsi/scsi) Empty [8.7.] Other >> > information that might be relevant to the problem (please look in >> > /proc and include all information that you think to be relevant): >> > Relevant logs after running `ethtool -s enp6s0 speed 1000`: >> > >> > juil. 25 21:14:56 kkiotarch NetworkManager[459]: <info> >> > [1690312496.0963] device (enp6s0): carrier: link connected juil. 25 >> > 21:14:56 kkiotarch kernel: igc 0000:06:00.0 enp6s0: NIC Link is Up >> > 2500 Mbps Full Duplex, Flow Control: RX/TX >> > >> > [X.] Other notes, patches, fixes, workarounds: >> > As a temporary solution, I have forced port speed to be set at 1000 >> > Mbps via my router. >> >> rather auto negotiated to 1G (force speed is n/a for 1G/2.5G). This won't >> resolve disconnetions. >> >> > >> > Apologies if this should have submitted to my distribution's bug >> > report first (Arch Linux); on my current kernel version, there should >> > be no patches applied here compared to upstream. >> > >> > Thank you, >> > KKIOT >> > >> > _______________________________________________ >> > Intel-wired-lan mailing list >> > Intel-wired-lan@osuosl•org >> > https://lists.osuosl.org/mailman/listinfo/intel-wired-lan >> >> _______________________________________________ >> Intel-wired-lan mailing list >> Intel-wired-lan@osuosl•org >> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan >> ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-07-29 17:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <NaDlWbh--3-9@tuta.io>
2023-07-29 7:50 ` [Intel-wired-lan] PROBLEM: igc driver - Ethernet NIC speed not changing Neftin, Sasha
2023-07-29 8:02 ` Zulkifli, Muhammad Husaini
2023-07-29 17:39 ` kkiot
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox