* Re: Kexec Reboot Network Issue [not found] ` <4C3F2ACF.60601-2CkDue2ckGJOSnsfY10OVw@public.gmane.org> @ 2010-07-16 7:15 ` Simon Horman 2010-07-18 4:25 ` Eric W. Biederman 0 siblings, 1 reply; 2+ messages in thread From: Simon Horman @ 2010-07-16 7:15 UTC (permalink / raw) To: Richard Genthner Cc: netdev-u79uwXL29TY76Z2rM5mHXA, Matt Carlson, kexec-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Michael Chan [ CCed Michael Chan, Matt Carlson and Netdev ] On Thu, Jul 15, 2010 at 11:35:43AM -0400, Richard Genthner wrote: > On 07/15/2010 10:20 AM, Simon Horman wrote: > >On Thu, Jul 15, 2010 at 07:59:07AM -0400, Richard Genthner wrote: > >>I'm currently using the following string: > >> > >>kexex --type=elf-x86_64 --args-linux -l /boot/vmlinuz-2.6.18-12.el5 > >>--initrid=/boot/initrd-2.6.18-128.el6.img --append="`cat > >>/proc/cmdline`" > >>kexec -e > >> > >>Some times we can get to the box from any subnet, other times we can > >>only get to the box from the same subnet only. Our solution to this > >>is to down the iface and then restart networking. Has anyone else > >>run into this issue? > >Hi Richard, > > > >could you be more specific about which NIC you are using? > >And is it at all possible to test a newer kernel version? > > > >What I suspect is happening is that the NIC is getting into an unknown > >state. And what I'm hoping is that is a problem thats already been > >addressed. > > I would try a different kenerl but our cluster fs has us locked to > this kernel until we finish the upgrade to the new cluster fs > version. heres ethtool on the iface > > from lshw > *-network > description: Ethernet interface > product: NetXtreme BCM5721 Gigabit Ethernet PCI Express > vendor: Broadcom Corporation > physical id: 0 > bus info: pci@0000:03:00.0 > logical name: eth0 > version: 21 > serial: 00:25:64:3b:9c:ae > size: 1GB/s > capacity: 1GB/s > width: 64 bits > clock: 33MHz > capabilities: pm vpd msi pciexpress bus_master > cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt > 1000bt-fd autonegotiation > configuration: autonegotiation=on broadcast=yes > driver=tg3 driverversion=3.93 duplex=full firmware=5721-v3.65, > ASFIPMI v6.25 ip=172.16.1.123 latency=0 link=yes module=tg3 > multicast=yes port=twisted pair speed=1GB/s Hi Richard, first, please don't top-post, its not the done thing in these parts. I had a quick hunt through the git change log and the onl changed that jumped out was "[TG3]: Fix msi issue with kexec/kdump"[1], but this seems to have been back-ported to the initrd-2.6.18-128.el5 (I assume you meant 5 not 6) kernel. [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ee6a99b539a50b4e9398938a0a6d37f8bf911550 In any case I strongly suspect that the problem is a kernel problem and as such can't be solved modifying the kernel or at least tg.ko module (which is probably in the initrd). I suggest logging bug report with Red Hat. ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Kexec Reboot Network Issue 2010-07-16 7:15 ` Kexec Reboot Network Issue Simon Horman @ 2010-07-18 4:25 ` Eric W. Biederman 0 siblings, 0 replies; 2+ messages in thread From: Eric W. Biederman @ 2010-07-18 4:25 UTC (permalink / raw) To: Simon Horman; +Cc: Richard Genthner, Michael Chan, Matt Carlson, netdev, kexec Simon Horman <horms@verge•net.au> writes: > [ CCed Michael Chan, Matt Carlson and Netdev ] > > On Thu, Jul 15, 2010 at 11:35:43AM -0400, Richard Genthner wrote: >> On 07/15/2010 10:20 AM, Simon Horman wrote: >> >On Thu, Jul 15, 2010 at 07:59:07AM -0400, Richard Genthner wrote: >> >>I'm currently using the following string: >> >> >> >>kexex --type=elf-x86_64 --args-linux -l /boot/vmlinuz-2.6.18-12.el5 >> >>--initrid=/boot/initrd-2.6.18-128.el6.img --append="`cat >> >>/proc/cmdline`" >> >>kexec -e >> >> >> >>Some times we can get to the box from any subnet, other times we can >> >>only get to the box from the same subnet only. Our solution to this >> >>is to down the iface and then restart networking. Has anyone else >> >>run into this issue? >> >Hi Richard, >> > >> >could you be more specific about which NIC you are using? >> >And is it at all possible to test a newer kernel version? >> > >> >What I suspect is happening is that the NIC is getting into an unknown >> >state. And what I'm hoping is that is a problem thats already been >> >addressed. >> >> I would try a different kenerl but our cluster fs has us locked to >> this kernel until we finish the upgrade to the new cluster fs >> version. heres ethtool on the iface >> >> from lshw >> *-network >> description: Ethernet interface >> product: NetXtreme BCM5721 Gigabit Ethernet PCI Express >> vendor: Broadcom Corporation >> physical id: 0 >> bus info: pci@0000:03:00.0 >> logical name: eth0 >> version: 21 >> serial: 00:25:64:3b:9c:ae >> size: 1GB/s >> capacity: 1GB/s >> width: 64 bits >> clock: 33MHz >> capabilities: pm vpd msi pciexpress bus_master >> cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt >> 1000bt-fd autonegotiation >> configuration: autonegotiation=on broadcast=yes >> driver=tg3 driverversion=3.93 duplex=full firmware=5721-v3.65, >> ASFIPMI v6.25 ip=172.16.1.123 latency=0 link=yes module=tg3 >> multicast=yes port=twisted pair speed=1GB/s > > Hi Richard, > > first, please don't top-post, its not the done thing in these parts. > > I had a quick hunt through the git change log and the onl changed that > jumped out was "[TG3]: Fix msi issue with kexec/kdump"[1], but this > seems to have been back-ported to the initrd-2.6.18-128.el5 (I assume > you meant 5 not 6) kernel. > > [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ee6a99b539a50b4e9398938a0a6d37f8bf911550 > > In any case I strongly suspect that the problem is a kernel problem and as > such can't be solved modifying the kernel or at least tg.ko module (which > is probably in the initrd). I suggest logging bug report with Red Hat. The classic workaround is to rmmod the driver before calling kexec. Frequently driver remove methods used by rmmod are much more tested then the shutdown methods used by kexec and reboot. Eric ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-07-18 4:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4C3EF80B.1040400@symplicity.com>
[not found] ` <20100715142003.GB19856@verge.net.au>
[not found] ` <4C3F2ACF.60601@symplicity.com>
[not found] ` <4C3F2ACF.60601-2CkDue2ckGJOSnsfY10OVw@public.gmane.org>
2010-07-16 7:15 ` Kexec Reboot Network Issue Simon Horman
2010-07-18 4:25 ` Eric W. Biederman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox