From: arno@natisbad•org (Arnaud Ebalard)
To: linux-arm-kernel@lists•infradead.org
Subject: [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s
Date: Tue, 12 Nov 2013 16:34:24 +0100 [thread overview]
Message-ID: <87vbzxd473.fsf@natisbad.org> (raw)
In-Reply-To: <20131112100126.GB23981@1wt.eu> (Willy Tarreau's message of "Tue, 12 Nov 2013 11:01:26 +0100")
Hi,
Willy Tarreau <w@1wt•eu> writes:
> On Tue, Nov 12, 2013 at 10:14:34AM +0100, Arnaud Ebalard wrote:
>> Tests for the rgression were done w/ scp, and were hence limited by the
>> crypto (16MB/s using arcfour128). But I also did some tests w/ a simple
>> wget for a file served by Apache *before* the regression and I never got
>> more than 60MB/s from what I recall. Can you beat that?
>
> Yes, I finally picked my mirabox out of my bag for a quick test. It boots
> off 3.10.0-rc7 and I totally saturate one port (stable 988 Mbps) with even
> a single TCP stream.
Thanks for the feedback. That's interesting. What are you using for your tests
(wget, ...)?
> With two systems, one directly connected (dockstar) and the other one via
> a switch, I get 2*650 Mbps (a single TCP stream is enough on each).
>
> I'll have to re-run some tests using a more up to date kernel, but that
> will probably not be today though.
Can you give a pre-3.11.7 kernel a try if you find the time? I started
working on RN102 during 3.10-rc cycle but do not remember if I did the
first preformance tests on 3.10 or 3.11. And if you find more time,
3.11.7 would be nice too ;-)
Cheers,
a+
next prev parent reply other threads:[~2013-11-12 15:34 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-10 13:53 [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s Arnaud Ebalard
2013-11-12 6:48 ` Cong Wang
2013-11-12 7:56 ` Arnaud Ebalard
2013-11-12 8:36 ` Willy Tarreau
2013-11-12 9:14 ` Arnaud Ebalard
2013-11-12 10:01 ` Willy Tarreau
2013-11-12 15:34 ` Arnaud Ebalard [this message]
2013-11-13 7:22 ` Willy Tarreau
2013-11-17 14:19 ` Willy Tarreau
2013-11-17 17:41 ` Eric Dumazet
2013-11-19 6:44 ` Arnaud Ebalard
2013-11-19 13:53 ` Eric Dumazet
2013-11-19 17:43 ` Willy Tarreau
2013-11-19 18:31 ` Eric Dumazet
2013-11-19 18:41 ` Willy Tarreau
2013-11-19 23:53 ` Arnaud Ebalard
2013-11-20 0:08 ` Eric Dumazet
2013-11-20 0:35 ` Willy Tarreau
2013-11-20 0:43 ` Eric Dumazet
2013-11-20 0:52 ` Willy Tarreau
2013-11-20 8:50 ` Thomas Petazzoni
2013-11-20 19:21 ` Arnaud Ebalard
2013-11-20 19:11 ` Willy Tarreau
2013-11-20 19:26 ` Arnaud Ebalard
2013-11-20 21:28 ` Arnaud Ebalard
2013-11-20 21:54 ` Willy Tarreau
2013-11-21 0:44 ` Willy Tarreau
2013-11-21 21:51 ` Arnaud Ebalard
2013-11-21 21:52 ` Willy Tarreau
2013-11-21 22:00 ` Eric Dumazet
2013-11-21 22:55 ` Arnaud Ebalard
2013-11-21 23:23 ` Rick Jones
[not found] ` <20131121183834.GB18513@1wt.eu>
2013-11-21 19:04 ` ARM network performance and dma_mask (was: [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s) Thomas Petazzoni
2013-11-21 21:51 ` ARM network performance and dma_mask (was: [BUG, REGRESSION?] 3.11.6+, 3.12: " Willy Tarreau
2013-11-21 22:01 ` ARM network performance and dma_mask Rob Herring
2013-11-21 22:13 ` Willy Tarreau
2013-11-20 17:12 ` [BUG,REGRESSION?] 3.11.6+,3.12: GbE iface rate drops to few KB/s Willy Tarreau
2013-11-20 17:30 ` Eric Dumazet
2013-11-20 17:38 ` Willy Tarreau
2013-11-20 18:52 ` David Miller
2013-11-20 17:34 ` Willy Tarreau
2013-11-20 17:40 ` Eric Dumazet
2013-11-20 18:15 ` Willy Tarreau
2013-11-20 18:21 ` Eric Dumazet
2013-11-20 18:29 ` Willy Tarreau
2013-11-20 19:22 ` Arnaud Ebalard
2013-11-18 10:09 ` David Laight
2013-11-18 10:52 ` Willy Tarreau
2013-11-18 10:26 ` Thomas Petazzoni
2013-11-18 10:44 ` Simon Guinot
2013-11-18 16:54 ` Stephen Hemminger
2013-11-18 17:13 ` Eric Dumazet
2013-11-18 10:51 ` Willy Tarreau
2013-11-18 17:58 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vbzxd473.fsf@natisbad.org \
--to=arno@natisbad$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox