From: t.figa@samsung•com (Tomasz Figa)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH V4 3/5] dt: exynos5420: Enable support for DWC3 controller
Date: Wed, 09 Apr 2014 13:11:06 +0200 [thread overview]
Message-ID: <53452ACA.1040008@samsung.com> (raw)
In-Reply-To: <1396967803-28868-4-git-send-email-gautam.vivek@samsung.com>
On 08.04.2014 16:36, Vivek Gautam wrote:
> Add device tree nodes for DWC3 controller present on
> Exynos 5420 SoC, to enable support for USB 3.0.
>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung•com>
> ---
> arch/arm/boot/dts/exynos5420.dtsi | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index a6efb52..20c2d0b 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -653,6 +653,23 @@
> clock-names = "tmu_apbif", "tmu_triminfo_apbif";
> };
>
> + usb at 12000000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&clock 366>;
> + clock-names = "usbdrd30";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + dwc3 {
> + compatible = "synopsys,dwc3";
> + reg = <0x12000000 0x10000>;
> + interrupts = <0 72 0>;
> + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> usbdrd_phy0: phy at 12100000 {
> compatible = "samsung,exynos5420-usbdrd-phy";
> reg = <0x12100000 0x100>;
> @@ -663,6 +680,23 @@
> #phy-cells = <1>;
> };
>
> + usb at 12400000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&clock 367>;
> + clock-names = "usbdrd30";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + dwc3 {
> + compatible = "synopsys,dwc3";
> + reg = <0x12400000 0x10000>;
> + interrupts = <0 73 0>;
> + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> usbdrd_phy1: phy at 12500000 {
> compatible = "samsung,exynos5420-usbdrd-phy";
> reg = <0x12500000 0x100>;
>
Reviewed-by: Tomasz Figa <t.figa@samsung•com>
--
Best regards,
Tomasz
next prev parent reply other threads:[~2014-04-09 11:11 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-08 14:36 [PATCH V4 0/5] Add Exynos5 USB 3.0 phy driver based on generic PHY framework Vivek Gautam
2014-04-08 14:36 ` [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver Vivek Gautam
2014-04-09 11:06 ` Tomasz Figa
2014-04-09 11:49 ` Vivek Gautam
2014-04-09 13:33 ` Tomasz Figa
2014-04-10 11:39 ` Vivek Gautam
2014-04-15 6:09 ` Vivek Gautam
2014-04-16 13:44 ` Tomasz Figa
2014-04-16 14:49 ` Vivek Gautam
2014-04-22 2:18 ` Jingoo Han
2014-04-22 3:35 ` Vivek Gautam
2014-04-14 11:54 ` Kishon Vijay Abraham I
2014-04-14 12:05 ` Vivek Gautam
2014-04-14 13:05 ` Kishon Vijay Abraham I
2014-04-14 13:44 ` Tomasz Figa
2014-04-14 13:49 ` Vivek Gautam
2014-04-14 14:21 ` Sylwester Nawrocki
2014-04-15 5:07 ` Vivek Gautam
2014-04-14 12:27 ` Kishon Vijay Abraham I
2014-04-14 12:42 ` Vivek Gautam
2014-04-14 12:59 ` Kishon Vijay Abraham I
2014-04-14 13:20 ` Vivek Gautam
2014-04-14 13:26 ` Kishon Vijay Abraham I
2014-04-14 13:40 ` Vivek Gautam
2014-04-14 13:46 ` Vivek Gautam
2014-04-14 13:49 ` Tomasz Figa
2014-04-15 13:59 ` Kishon Vijay Abraham I
2014-04-14 14:37 ` Sylwester Nawrocki
2014-04-15 5:09 ` Vivek Gautam
2014-04-25 7:57 ` Tushar Behera
2014-04-25 8:08 ` Vivek Gautam
2014-04-08 14:36 ` [PATCH v4 2/5] dt: exynos5420: Enable support for USB 3.0 PHY controller Vivek Gautam
2014-04-09 11:10 ` Tomasz Figa
2014-04-08 14:36 ` [PATCH V4 3/5] dt: exynos5420: Enable support for DWC3 controller Vivek Gautam
2014-04-09 11:11 ` Tomasz Figa [this message]
2014-04-08 14:36 ` [PATCH V4 4/5] dt: exynos5250: Enable support for generic USB DRD phy Vivek Gautam
2014-04-09 11:11 ` Tomasz Figa
2014-04-08 14:36 ` [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver Vivek Gautam
2014-04-09 11:13 ` Tomasz Figa
2014-04-09 11:34 ` Vivek Gautam
2014-04-16 13:33 ` Richard Genoud
2014-04-16 14:42 ` Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53452ACA.1040008@samsung.com \
--to=t.figa@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox