public inbox for linux-arm-kernel@lists.infradead.org 
 help / color / mirror / Atom feed
From: s.nawrocki@samsung•com (Sylwester Nawrocki)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
Date: Mon, 14 Apr 2014 16:37:02 +0200	[thread overview]
Message-ID: <534BF28E.7040906@samsung.com> (raw)
In-Reply-To: <1396967803-28868-2-git-send-email-gautam.vivek@samsung.com>

On 08/04/14 16:36, Vivek Gautam wrote:
> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> index 28f9edb..6d99ba9 100644
> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> @@ -74,3 +74,45 @@ phy-consumer at 12340000 {
>  
>  Refer to DT bindings documentation of particular PHY consumer devices for more
>  information about required PHYs and the way of specification.
> +
> +Samsung Exynos5 SoC series USB DRD PHY controller
> +--------------------------------------------------
> +
> +Required properties:
> +- compatible : Should be set to one of the following supported values:
> +	- "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
> +	- "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
> +- reg : Register offset and length of USB DRD PHY register set;
> +- clocks: Clock IDs array as required by the controller
> +- clock-names: names of clocks correseponding to IDs in the clock property;
> +	       Required clocks:
> +	- phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
> +	       used for register access.
> +	- ref: PHY's reference clock (usually crystal clock), associated by
> +	       phy name, used to determine bit values for clock settings
> +	       register.
> +	Additional clock required for Exynos5420:
> +	- usb30_sclk_100m: Additional special clock used for PHY operation
> +			   depicted as 'sclk_usbphy30' in CMU of Exynos5420.
> +- samsung,syscon-phandle: phandle for syscon interface, which is used to
> +			  control pmu registers for power isolation.

Why to append "-phandle" to the property's name ? If this is for PMU
perhaps make it more explicit and name it: samsung,pmu-syscon or
samsung,pmureg ?

> +- samsung,pmu-offset: phy power control register offset to pmu-system-controller
> +		      base.
> +- #phy-cells : from the generic PHY bindings, must be 1;
> +
> +For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
> +compatible PHYs, the second cell in the PHY specifier identifies the
> +PHY id, which is interpreted as follows:
> +  0 - UTMI+ type phy,
> +  1 - PIPE3 type phy,

-- 
Thanks,
Sylwester

  parent reply	other threads:[~2014-04-14 14:37 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-08 14:36 [PATCH V4 0/5] Add Exynos5 USB 3.0 phy driver based on generic PHY framework Vivek Gautam
2014-04-08 14:36 ` [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver Vivek Gautam
2014-04-09 11:06   ` Tomasz Figa
2014-04-09 11:49     ` Vivek Gautam
2014-04-09 13:33       ` Tomasz Figa
2014-04-10 11:39         ` Vivek Gautam
2014-04-15  6:09           ` Vivek Gautam
2014-04-16 13:44             ` Tomasz Figa
2014-04-16 14:49               ` Vivek Gautam
2014-04-22  2:18                 ` Jingoo Han
2014-04-22  3:35                   ` Vivek Gautam
2014-04-14 11:54     ` Kishon Vijay Abraham I
2014-04-14 12:05       ` Vivek Gautam
2014-04-14 13:05         ` Kishon Vijay Abraham I
2014-04-14 13:44           ` Tomasz Figa
2014-04-14 13:49             ` Vivek Gautam
2014-04-14 14:21               ` Sylwester Nawrocki
2014-04-15  5:07                 ` Vivek Gautam
2014-04-14 12:27   ` Kishon Vijay Abraham I
2014-04-14 12:42     ` Vivek Gautam
2014-04-14 12:59       ` Kishon Vijay Abraham I
2014-04-14 13:20         ` Vivek Gautam
2014-04-14 13:26           ` Kishon Vijay Abraham I
2014-04-14 13:40             ` Vivek Gautam
2014-04-14 13:46               ` Vivek Gautam
2014-04-14 13:49               ` Tomasz Figa
2014-04-15 13:59                 ` Kishon Vijay Abraham I
2014-04-14 14:37   ` Sylwester Nawrocki [this message]
2014-04-15  5:09     ` Vivek Gautam
2014-04-25  7:57     ` Tushar Behera
2014-04-25  8:08       ` Vivek Gautam
2014-04-08 14:36 ` [PATCH v4 2/5] dt: exynos5420: Enable support for USB 3.0 PHY controller Vivek Gautam
2014-04-09 11:10   ` Tomasz Figa
2014-04-08 14:36 ` [PATCH V4 3/5] dt: exynos5420: Enable support for DWC3 controller Vivek Gautam
2014-04-09 11:11   ` Tomasz Figa
2014-04-08 14:36 ` [PATCH V4 4/5] dt: exynos5250: Enable support for generic USB DRD phy Vivek Gautam
2014-04-09 11:11   ` Tomasz Figa
2014-04-08 14:36 ` [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver Vivek Gautam
2014-04-09 11:13   ` Tomasz Figa
2014-04-09 11:34     ` Vivek Gautam
2014-04-16 13:33       ` Richard Genoud
2014-04-16 14:42         ` Vivek Gautam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=534BF28E.7040906@samsung.com \
    --to=s.nawrocki@samsung$(echo .)com \
    --cc=linux-arm-kernel@lists$(echo .)infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox